Mazdaspeed Wing on 2009 Rx-8
 

Well guys i have a 09 rx8 GT, my question is that if it could be possible to put a mazdaspeed wing on my car, if somebody did it already please post picture or give me information, thanks (this is my first thread) :rolleyes:

I'm pretty sure it works just fine. I seem to recall it's listed as compatible with the 2009 in the MazdaSpeed RX-8 catalog/brochure I got from the dealer last year. Have you checked the MazdaSpeed parts and accessories site?

entirely possible and done. the only problem could be color matching; for instance, finish line doesn't list the wing available in aurora blue, sparkling black, or that *diamond* color. they come it primered so you can just have it painted

I checked a website called mazdaspeedstore.com but they didn't have any spoiler for the rx8, can you send me a link to the website you was talking about, i have the velocity red but i don't know if i am going to painted red or painted black, because i painted my wheel gloss black and i am going to change my hood to a carbon fiber one, thanks

painting is the reason that i just went with carbon. Here's some pics for you though:

Attachment 256834
Attachment 256835
Attachment 256836

that looks sexy i was wondering how carbon fiber ms wing would look on blue. very nice.

Dang, that looks good. What did you do with your factory wing mystical?

it's still attached to my factory trunk in my little climate controlled storage room at my house lol. hood, stock springs and struts, intake, everything i've replaced except the sway bars are all sitting together in case i ever go back to stock for some reason.

I actually have had the thought of getting rid of it a couple of times to fund building my Cobra and going stupid with it because I'd end up with money left over, but the more i really really think about it the more I'd love to do something completely insane in the 8 like a V8 swap. just to make people around where i live get the "WTF IS THAT THING?!" and keep the cobra as a nice weekend cruiser that's already quick

wow, the MS wing looks amazing on newer 8's!

Mystical Snake :bigok:

Velocity Red
http://img80.imageshack.us/img80/1835/pb1n.jpg

Black spoiler on an Aurora Blue.. (Should give you a feel for what a black spoiler looks like on a different color car)
http://img191.imageshack.us/img191/3424/p1cass3shh.jpg

MS spoiler without the bottom lip portion of the spoiler
http://img807.imageshack.us/img807/3...9716130440.jpg

I like the blue one better

Gracias senor!

It's always nice to know other people can enjoy what I do as well. If people don't, oh well...it's my car anyways lmao hopefully here soon I will have some VERY big plans unfolding...or atleast i will if things go my way :rock:

where can i get a hold of a cf one?

Carbon Creations sells the CF mazdaspeed wing. So any place that carries the Carbon Creations brand should have that wing for ya

how was the fitment on the carbon creations one?

fitment wasn't bad. Just had to take my time and work with slowly to make sure everything went together properly and perfectly. for the lip spoiler section of it, I used 3M double-sided adhesive to hold it in place firmly. and then the aluminum pedestals for the actualy wing part are bolted down.

Thanks for the info and pic, where did you get the MS carbon fiber spoiler and how much?

you'll get a laugh out of the website probably, but it's one of the cheapest I found and I knew Carbon Creations was a good company to begin with. So I gave it a shot:

https://www.blingbros.net/0408-mazda...ng-p-7175.html

Was it hard to mount it? (guessing you did it yourself)

i didn't have any problems further than what other guys normally have with aftermarket decklids (i.e. having to take off the rubber gasket for the trunk). The hardest part was getting the 3rd brake light to fit perfectly. It mostly just took a bit of fanagling but came out just fine. I also took the time to drill holes in the fiberglass bracing on the underside of the carbon fiber (being careful not to get into the CF itself) so that i could mount the factory carpet panel so that it made a nice clean installation with none of the wiring harness showing other than what shows on the stock deck lid.

I need a side show down and at an angle. It is hard to tell if I like it.

just a quick question would it have matched up this the existing holes from the factory one??

Does anyone have the layout for the holes for the mspeed wing?

I'd also like to know where we can get these, I'm not so interested in the CF one as I am the EB one.