New mods: Autoexe-Tanabe-Agency Power-Clutch Masters
05-10-2007, 02:26 PM
#1
90% Carbon-100% Power
Thread Starter
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
New mods: Autoexe-Tanabe-Agency Power-Clutch Masters
Just Installed today some staff.
Autoexe Under Member Brace
Autoexe Rear Brake Rotors (I painted the center to match the front grex 6 pot i have)
Autoexe Rear Street Brake Pads
Tanabe Front Sway Bar
Tanabe Rear Sway Bar
Agency Powers Front End Links
Agency Powers Rear End Links
And I am waiting for my Clutch Masters 4-Puck FX400 Clutch Kit so i ll be ready for the mazsport which i also been waiting soon.
And i installed some cusco oils in my cusco 1.5 rs lsd and now it feels smoother..
I also have greddy front and rear strut bars and hks hypermax 2 coilovers and from braking i have the big brake kit from Greddy the grex 6-pot and i have finished the suspension and braking..I cant install anything else there is not room!! :D
I have to say that the Autoexe department is one of the best i have ever deal with..I had everything in 3 days!!!From Japan to Greece!!!That made me wanna buy more and more and more Autoexe but i had everything on my car... :D
I havent driven the car yet a lot and i also reinstalled the stock cat and header cause i have sold the aftermarket i had and the turbo kit includes a header..Next week i will get a 3" pipe with a big flow cat to hold the turbo..
From a quick drive i went everything runs smooth and i feel it a lot stiffer than before..The quality is top!!
PRESS ON THE THUMBS
Autoexe Under Member Brace
Autoexe Rear Brake Rotors (I painted the center to match the front grex 6 pot i have)
Autoexe Rear Street Brake Pads
Tanabe Front Sway Bar
Tanabe Rear Sway Bar
Agency Powers Front End Links
Agency Powers Rear End Links
And I am waiting for my Clutch Masters 4-Puck FX400 Clutch Kit so i ll be ready for the mazsport which i also been waiting soon.
And i installed some cusco oils in my cusco 1.5 rs lsd and now it feels smoother..
I also have greddy front and rear strut bars and hks hypermax 2 coilovers and from braking i have the big brake kit from Greddy the grex 6-pot and i have finished the suspension and braking..I cant install anything else there is not room!! :D
I have to say that the Autoexe department is one of the best i have ever deal with..I had everything in 3 days!!!From Japan to Greece!!!That made me wanna buy more and more and more Autoexe but i had everything on my car... :D
I havent driven the car yet a lot and i also reinstalled the stock cat and header cause i have sold the aftermarket i had and the turbo kit includes a header..Next week i will get a 3" pipe with a big flow cat to hold the turbo..
From a quick drive i went everything runs smooth and i feel it a lot stiffer than before..The quality is top!!
PRESS ON THE THUMBS
Last edited by GrRx8MaZdA; 05-10-2007 at 02:33 PM.
05-10-2007, 03:54 PM
#7
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
How was the install on the Autoexe Under Member Brace? Was it a straight bolt on? Any fabrication or removal of other parts needed? Did you have to drill any holes? Did you feel a difference with it? This may be my next mod.
05-10-2007, 04:10 PM
#8
90% Carbon-100% Power
Thread Starter
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Devil go for it man...Excellent...The stock parts are veeeeeeeeery weak..Big difference between them.
Well you dont drill any new holes but in the center part you must fabricate a bit but its very easy...
Hough if you had orgasms with that how would you feel if you see my other thread??
https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/last-my-super-wide-rx8-greek-back-d-112711/page8/
Well you dont drill any new holes but in the center part you must fabricate a bit but its very easy...
Hough if you had orgasms with that how would you feel if you see my other thread??
https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/last-my-super-wide-rx8-greek-back-d-112711/page8/
05-10-2007, 06:25 PM
#9
Registered
Join Date: Jul 2003
Location: Regina
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Hey GrRx8Mazda,
Did you have any problems with the bushings on the Tanabe Sway bars. Another user on this forum said that the bushings are wrong on his sways.
Thanks
Hab
PS you make me very jealous, I am Greek too, but so few mods!!!!!
Did you have any problems with the bushings on the Tanabe Sway bars. Another user on this forum said that the bushings are wrong on his sways.
Thanks
Hab
PS you make me very jealous, I am Greek too, but so few mods!!!!!
05-10-2007, 07:59 PM
#10
90% Carbon-100% Power
Thread Starter
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Not a single problem with the bushings..Everything went well..I dont know maybe tanabe updated the parts or something but everything were smooth...
05-10-2007, 10:23 PM
#11
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
Devil go for it man...Excellent...The stock parts are veeeeeeeeery weak..Big difference between them.
Well you dont drill any new holes but in the center part you must fabricate a bit but its very easy...
Hough if you had orgasms with that how would you feel if you see my other thread??
https://www.rx8club.com/showthread.php?t=112711&page=8
Well you dont drill any new holes but in the center part you must fabricate a bit but its very easy...
Hough if you had orgasms with that how would you feel if you see my other thread??
https://www.rx8club.com/showthread.php?t=112711&page=8
05-11-2007, 01:10 AM
#13
90% Carbon-100% Power
Thread Starter
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
The endlinks dont require any drilling at all...Nothing need to be drilled from all the parts i installed...
The caliper paint is a paint tha is used to paint bikes etc...Yeah its hot!
The autoexe member brace the center piece doenst fit under the car and you need to cut a very small piece from the bottom of the car so it can fit..Nothing important and nothing dangerous...
The caliper paint is a paint tha is used to paint bikes etc...Yeah its hot!
The autoexe member brace the center piece doenst fit under the car and you need to cut a very small piece from the bottom of the car so it can fit..Nothing important and nothing dangerous...
05-11-2007, 08:00 AM
#14
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
The endlinks dont require any drilling at all...Nothing need to be drilled from all the parts i installed...
The caliper paint is a paint tha is used to paint bikes etc...Yeah its hot!
The autoexe member brace the center piece doenst fit under the car and you need to cut a very small piece from the bottom of the car so it can fit..Nothing important and nothing dangerous...
The caliper paint is a paint tha is used to paint bikes etc...Yeah its hot!
The autoexe member brace the center piece doenst fit under the car and you need to cut a very small piece from the bottom of the car so it can fit..Nothing important and nothing dangerous...
05-11-2007, 08:09 AM
#15
Man Up!!!!
Join Date: May 2007
Location: Ft Bragg, NC
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Goooodddddd Daaaaayyyyyyyummm!!!
Hough if you had orgasms with that how would you feel if you see my other thread??
https://www.rx8club.com/showthread.php?t=112711&page=8[/QUOTE]
Oh yeah dont you worry; after seeing your hotass 8 i searched for all other threads of yours just to keep the feeling going. Damn boy that is amazing work.....Just a little envious. But dont stop until youre satisfied!!!!!!!!!!!
https://www.rx8club.com/showthread.php?t=112711&page=8[/QUOTE]
Oh yeah dont you worry; after seeing your hotass 8 i searched for all other threads of yours just to keep the feeling going. Damn boy that is amazing work.....Just a little envious. But dont stop until youre satisfied!!!!!!!!!!!
05-24-2007, 02:01 AM
#19
90% Carbon-100% Power
Thread Starter
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
I have driven the car a lot these days and in hard situations-thats why my clutch is dead right no xaxa-and i can tell that the car just wont turn in the corners...JUST PERFECT FEELING...No rolling or something and i can really feel a big difference...Some usd nice spend
05-29-2007, 03:46 PM
#24
90% Carbon-100% Power
Thread Starter
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
I posted pics in the first post offcourse many pics...
Thanks guys...
The "go" is coming and its a BIG go!!!!Just waiting for the parts to arrive...
Thanks guys...
The "go" is coming and its a BIG go!!!!Just waiting for the parts to arrive...
Thread
Thread Starter
Forum
Replies
Last Post