need some help- front sway bar measurements
#1
need some help- front sway bar measurements
I'm looking for a sway bar for a different application, I'm considering using an RX8 front sway bar.
so.... I need some dimensions of a stock RX8 front bar, if someone would be gracious enough to help me out.
here's some dimensions that would be really helpful:
diameter
distance between mount points (inside to inside of bushings & outside to outside)
width @ end link mount points (inside & outside dimensions)
radius of rotation
much thanks in advance!
so.... I need some dimensions of a stock RX8 front bar, if someone would be gracious enough to help me out.
here's some dimensions that would be really helpful:
diameter
distance between mount points (inside to inside of bushings & outside to outside)
width @ end link mount points (inside & outside dimensions)
radius of rotation
much thanks in advance!
#3
No respecter of malarkey
iTrader: (25)
distance from main bar centerline to the endlink hole centerline is 7.375" (side dimension)
the distance between the outside bar ends where the endlinks mount is 42" (very bottom dimension)
the arm thickness where the endlinks mount is 1/4" (41.5" distance between the inside endlink mounting points per your arrows)
I'll have to measure the pivot bushing mounting point dimensions
the distance between the outside bar ends where the endlinks mount is 42" (very bottom dimension)
the arm thickness where the endlinks mount is 1/4" (41.5" distance between the inside endlink mounting points per your arrows)
I'll have to measure the pivot bushing mounting point dimensions
Thread
Thread Starter
Forum
Replies
Last Post