Need Help with Hipermax RS Coilovers
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: California
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Need Help with Hipermax RS Coilovers
Hi everyone this will be my first time to be posting up a message on this forum but i've been a member of here for quite some time now. Anyway I recently purchased a set of hks hipermax rs coilovers and I was wondering if anyone who has it would like to share their specs (stiffness/ride height) the whole works. Thanks lots
#2
RX8 HA HA
I have the hipermax II's. But the II's naturally run stiffer opposed to the RS. A buddy of mine has the RS installed and he is running 19 inch volks with the vertex kit. I can get his settings but he is away on a business trip for the remainder of the week. If you can wait a few days I will give you all the info you need for the settings.
As far as mine are set up, the front dampners are set at 22 and the rears are set at 20. 30 being the softest and 1 the stiffest. It has a very tight one finger gap evenly all around. Here is a link to when I installed them. It has my measurements:
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/x-hks-hipermax-ii-installed-x-etc-51616/
Bryan
As far as mine are set up, the front dampners are set at 22 and the rears are set at 20. 30 being the softest and 1 the stiffest. It has a very tight one finger gap evenly all around. Here is a link to when I installed them. It has my measurements:
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/x-hks-hipermax-ii-installed-x-etc-51616/
Bryan
#5
RX8 HA HA
Sorry it took so long bro! Spoke to my buddy and his dampners are set at default. Default is 20 at all 4 corners. Not to sure about his ride height but he's got a tight one finger gap from the top of the tire to the wheel well all around.
Thread
Thread Starter
Forum
Replies
Last Post