Lug Nuts for WedSport SA70
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Cairo, Georgia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Lug Nuts for WedSport SA70
I know the lug nut size is M12 x 1.5. There is not much room to get a standard lug nut in there. Do I need a Tuner Style or McGard Spline Drive lugs that are narrower? I ordered them from Evasive Motorsports with some Rays lug nots but they were M12 x 1.25 and not slim enough to fit anyway. Waited almost 12 weeks to get the wheels now I can't put them on. I hate that!
#2
Registered User
Thread Starter
Join Date: Sep 2006
Location: Cairo, Georgia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I guess this was a stupid question or no one has Weds. I'll answer my own question. I figured it out. They take a tuner style lug for low clearance situations. I called Evasive back, I had ordered the wheels and lugs over the phone. Had asked them to send the lugs that would fit the wheels for the 8. First they didn't want to take them back, some policy. I reminded them that I didn't order them they made the wrong decision. I didn't screw them on to mess up the threads. I'm sending them back and they will send the correct ones.
I did get the wheels on though. Found some real heavy ugly lug nuts locally. It's amazing what light weight wheels and new tires will do.
I did get the wheels on though. Found some real heavy ugly lug nuts locally. It's amazing what light weight wheels and new tires will do.
#3
Registered
Join Date: Dec 2007
Location: Sunnyvale, CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
If you have a low clearance situation any tuner set should work.
I have a cheap set of ICW tuner lugs (hex-driven) and they work fine, though they are heavier than the stock lugs (lulz). 5Zigen makes some good tuner lugs that you might want to look into.
I have a cheap set of ICW tuner lugs (hex-driven) and they work fine, though they are heavier than the stock lugs (lulz). 5Zigen makes some good tuner lugs that you might want to look into.
Thread
Thread Starter
Forum
Replies
Last Post
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM