Notices
Series I Wheels, Tires, Brakes & Suspension

Exclusive Progress AutoX Springs Group Buy!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-01-2009, 06:14 PM
  #1  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Exclusive Progress AutoX Springs Group Buy!!

The testers are complete and the results are in and we are going to start the Group Buy for the Progress Springs!

We are going to be the sole exclusive distributor for the newly developed Progress Technology AutoX Springs!

Production will begin as soon as we get 10 pre-orders and from then it will take 5 weeks for Progress to complete production and units can begin shipping out.

The larger the Group buy the better the discount we are going to be offering.

If we can get 10 pre-orders the GB price will be $300, if we can get 20 pre-orders the GB price will be $270.

This will be including shipping prices as well for those entering the GB.

Pre-order deposits are going to be $200 and Final Payment to be made when production is completed.

PM me for payment instructions!


Specs:

Front Spring Rate: 425 Lbs./Inch
Rear Spring Rate: 280 Lbs./Inch

Height Adjustment Front: -0.8 inches
Height Adjustment Rear: -0.5 Inches


Feedback from tester:

Originally Posted by Cito
I have had the Progressive Track Springs on my RX8 now for about one month. During that time, I have used them on the street as well as for one event, an "autocross," at a local go-kart track.

THE CAR
2005 Mazda RX8 base model with Tokico D-spec shocks in back with adjustment cables and Koni yellows in front. That is really about it. I do have Whiteline front swaybar bushings and HKS single exhaust. The wheels are 5Zigen 17x9 +35 with 255/40/17 Dunlop Star Specs.

Distance from ground to center of wheelwell in inches (before/after):
LF: 27.375/26.25 RF: 27.25/26.25
LR: 26.375/26.5 RR: 26.25/26.5

So, on my car, the rear raised a bit and the front was nicely lowered. It looks better, but the pictures show that there is not as much lowering as one might expect. I think my stock rear springs were sagging, which is probably attributable to the tendency to carry heavy loads almost anywhere I drive for a long time. An interesting thought if going back to stock, maybe it would make sense to get new stock rear springs. As noted, my car has always been high riding. Even with these springs, the front looks higher than many cars in BS--part of that might be related to the shorter wheel and tire combination.

CAMBER (before/after):

LF: -1.3/-2.5 RF: -0.7/-2
LR: -1.5/-1.3 RR: -1.5/-1.5

These changes correlate well with the reduced ride height.

PHOTOS


STREET IMPRESSIONS
Positives: These springs have absolutely transformed the street handling for the better. The car is much less prone to understeer and it no longer has that obviously softly sprung feel. It feels similar to the stock S2000 I have driven and it rides better than the stock 350z I have driven--both on the street. As might be expected, the car is flatter through the corners. It is a little bit prone to oversteer, but only when I want it to be. I enjoy driving the car much more than I did before the change in springs.

Negatives: The ride is stiffer, and with this, my mild case of gynecomastia has become more noticeable. Thankfully, no black eyes or need for a bro, manziere,etc.yet. At any rate, the ride is definitely stiff, but this has been tuned to what I believe is a very acceptable level by adjusting the shocks to about 1.5 turns above full soft.

"TRACK" IMPRESSIONS
MaxQdata for the car with the tires and wheels (42), and with the tires, wheels, and springs (44) are attached. I posted the best runs (by lap) for each combination. Note that the best lap I had all day with the springs was my very first run. In looking at the lap times overall, the car was consistently faster with the springs. The 39.*** time before the springs was the outlier. With the springs, 39.*** laps were the norm. If I find time, I will compare the laps statistically.

Interestingly, my father ran faster times in the RX8 with the springs than he had in his prepared Mustang, which I was getting 37-second lap times in. I think this is a testament to how comfortable the car feels with the springs.

Positives
The car was immediately faster with the Track springs and it was SO fun to drive.

NeutralUnfortunately, the fun I was having really screwed up the lap times. One run I literally drifted through three of the corners dirttrack style. This is not the fault of the springs of course. Before the springs, even with the street tires, the problem was managing push and understeer. With the springs, the issue becomes managing speed and oversteer. There is no doubt in my mind that a better driver would be able to exploit the springs' potential very quickly. I need to play with the stiffness settings on the shocks to better balance the car especially in relation to use of street tires.

Negatives Really, I am not sure that there are any negative here. Even with my limitations as a driver, the springs consistently produced faster times. If you want a car that is benign and has no risk for spinning, then the springs might not be for you. Once you have tires and shocks, these springs are the way to go.

Well, that's it for now. The car is a better car with these springs. I would buy them for the street if the interest was in performance versus looks. I had never really considered using the RX8 for track days, but the change in the car with these springs has me thinking about doing it now.

Please note, I was not given the springs, I purchased them for $300. I was not paid for my thoughts or impressions.
The List:

1. S0L08
2. mp5
3. MilesJ
4.
5.
6.
7.
8.
9.
10.

Last edited by Race Roots; 10-15-2009 at 09:11 PM.
Old 10-02-2009, 01:40 PM
  #2  
Hot Pit
 
Winning 8's Avatar
 
Join Date: Jul 2005
Location: Castro Valley, CA
Posts: 658
Likes: 0
Received 0 Likes on 0 Posts
this is a must have items for guys is using the car with dual purposes. Nice ride quality, well balance, but once you see the cornering ability, you will think why Mazda did not put this spring on, in the first place. It work great with Koni shocks.....

Last edited by Winning 8; 10-03-2009 at 01:30 PM.
Old 10-02-2009, 05:24 PM
  #3  
Registered
 
Cito's Avatar
 
Join Date: Oct 2005
Location: Mason City, Iowa
Posts: 263
Likes: 0
Received 0 Likes on 0 Posts
I can't imagine buying any other spring out there, even for the street, with these available. I love the way they have changed the car on the street. Two thumbs up.
Old 10-03-2009, 09:21 AM
  #4  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Spots are filling up....don't miss out on this pricing

The List:

1. S0L08
2. mp5
3.
4.
5.
6.
7.
8.
9.
10.
Old 10-13-2009, 09:59 PM
  #5  
mp5
Registered
 
mp5's Avatar
 
Join Date: Jan 2003
Location: San Diego, CA
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
Bump. Is this group buy dead or what?
Old 10-14-2009, 09:25 PM
  #6  
Registered
 
MilesJ's Avatar
 
Join Date: Feb 2008
Location: South Bend, IN
Posts: 104
Likes: 0
Received 1 Like on 1 Post
I hope not. I would like to get in on this group buy, where do I send my money?
Old 10-14-2009, 09:41 PM
  #7  
The RX-8 is missed
iTrader: (3)
 
2tone's Avatar
 
Join Date: Aug 2005
Location: Houston, TX
Posts: 2,084
Likes: 0
Received 0 Likes on 0 Posts
so, my s techs, which are pretty stiff, are - from what i found on the forum - 207/145...so these springs are over twice that?? not questioning, just curious. compared to all the other springs out there, these things are absurdly higher spring rates.

if there's anything i don't like from what i've read, it's the lack of drop.
Old 10-14-2009, 09:50 PM
  #8  
mkuhnracing.com
iTrader: (3)
 
TopGear8's Avatar
 
Join Date: Jun 2007
Location: Charlotte, NC
Posts: 6,212
Likes: 0
Received 4 Likes on 4 Posts
^Well these springs give people the drop they want for Autox. When you lower the car too much it actually hurts the handling of the car too much because it is stressing some of the suspension componets. So as far as performance wise, these springs are just right.
Old 10-14-2009, 10:01 PM
  #9  
The RX-8 is missed
iTrader: (3)
 
2tone's Avatar
 
Join Date: Aug 2005
Location: Houston, TX
Posts: 2,084
Likes: 0
Received 0 Likes on 0 Posts
ah, thanks for the wisdom topgear! did you get new (non-black) wheels?

so as for the spring rates...that sounds crazy. i guess not so good for a daily driver huh. i'm on s techs, but had them for 20k or so I THINK...any clue how long they should last me before i start looking?
Old 10-14-2009, 10:46 PM
  #10  
mkuhnracing.com
iTrader: (3)
 
TopGear8's Avatar
 
Join Date: Jun 2007
Location: Charlotte, NC
Posts: 6,212
Likes: 0
Received 4 Likes on 4 Posts
^Yes I did, check out my thread in the Multimedia section for more pics
Old 10-15-2009, 11:28 AM
  #11  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MilesJ
I hope not. I would like to get in on this group buy, where do I send my money?
Added to the list!

PM sent.

Anyone that wants to get in on the GB let me know.

$200 deposit.
Old 10-15-2009, 01:27 PM
  #12  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MilesJ
I hope not. I would like to get in on this group buy, where do I send my money?
Originally Posted by TeamRX8
Sign me up, but if the wait is too long I'd just as soon pay the regular price

I ran higher rates than this on the street and it wasn't bad, but it's a subjective subject.
The sooner everyone is in this the faster this gets going so spread the word at events.
Old 10-15-2009, 08:56 PM
  #13  
No respecter of malarkey
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 26,727
Received 2,012 Likes on 1,640 Posts
Please remove me from the list, exit stage left .....
Old 10-15-2009, 09:12 PM
  #14  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by TeamRX8
Please remove me from the list, exit stage left .....
Sure thing I will let you know when they are physically here
Old 10-16-2009, 02:30 AM
  #15  
No respecter of malarkey
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 26,727
Received 2,012 Likes on 1,640 Posts
There's no need. I intend to convert my DA twin tube Koni shocks to use standard coilover springs. It's really not that difficult or expensive.
Old 10-17-2009, 03:14 PM
  #16  
Registered
 
Kafka's Avatar
 
Join Date: May 2003
Posts: 1,972
Likes: 0
Received 0 Likes on 0 Posts
bump for yo!

My only worry is that will the spring rate be too much even for rx8 40th anniversary bilstein shocks? I am planning to get Bilstein HD with this combo...

Any light on the street comfortability of the track spring (I know you got the street one but its too low for my taste...I have to drive the car in the winter and too low = snow plow)

IMHO this will be as close as the Rx8 PZ set up (well even more than 60% more spring rate than the custom made Eibach spring Prodrive used)

Thanks!
Old 10-17-2009, 03:31 PM
  #17  
Registered User
 
ferg's Avatar
 
Join Date: Sep 2008
Location: south florida
Posts: 974
Likes: 0
Received 1 Like on 1 Post
bump
Old 10-28-2009, 11:14 AM
  #18  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Kafka
bump for yo!

My only worry is that will the spring rate be too much even for rx8 40th anniversary bilstein shocks? I am planning to get Bilstein HD with this combo...

Any light on the street comfortability of the track spring (I know you got the street one but its too low for my taste...I have to drive the car in the winter and too low = snow plow)

IMHO this will be as close as the Rx8 PZ set up (well even more than 60% more spring rate than the custom made Eibach spring Prodrive used)

Thanks!
The Bilsteins should be ok we would have to wait and see how much they can handle from these springs so far the Koni's and Tokico's are doing just fine so I don't see why the Bilsteins would be much different.
Old 10-30-2009, 09:45 AM
  #19  
Registered
iTrader: (1)
 
S0l08's Avatar
 
Join Date: Jun 2008
Location: Paulina, LA
Posts: 245
Likes: 0
Received 1 Like on 1 Post
Will these get built if we can't get 10 people on the group buy? Really doesn't look like it's going to happen. I'd pay full price if I could just buy them outright. Otherwise I will have to look into onother option.
Old 10-30-2009, 02:19 PM
  #20  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by S0l08
Will these get built if we can't get 10 people on the group buy? Really doesn't look like it's going to happen. I'd pay full price if I could just buy them outright. Otherwise I will have to look into onother option.
It would probably be a bit more than that but yes I can talk to them about having only a few made. If we dont reach the 10 mark that is.

Probably not the best time to start a GB when it is downtime for most cars.
Old 10-30-2009, 03:02 PM
  #21  
Registered
iTrader: (1)
 
S0l08's Avatar
 
Join Date: Jun 2008
Location: Paulina, LA
Posts: 245
Likes: 0
Received 1 Like on 1 Post
Down time=time for changes
Seems everyone wanted them until it's time to buy them.

We have 4 events in Nov. 2 in Dec. But I really want to be set up for the beginning of next year.
Old 11-20-2009, 12:52 PM
  #22  
Registered
iTrader: (1)
 
S0l08's Avatar
 
Join Date: Jun 2008
Location: Paulina, LA
Posts: 245
Likes: 0
Received 1 Like on 1 Post
Any chance these will ever get made?
Old 11-23-2009, 08:11 AM
  #23  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Really up to the community, I have one other recently that said they were going to be entering the GB soon.
Old 11-23-2009, 11:46 AM
  #24  
The RX-8 is missed
iTrader: (3)
 
2tone's Avatar
 
Join Date: Aug 2005
Location: Houston, TX
Posts: 2,084
Likes: 0
Received 0 Likes on 0 Posts
wow, i let this slip my mind in the hopes i wouldn't want them still...ha ha. i'm definitely interested. i'm not sure how much life i have on my tein s's, and it's xmas time, so i'm not swimming in money right now!!

any idea on how much a non-group buy set would be? and like others have mentioned, if group buy never hits 10, can we still order these? i'm thinking in january i might be able to take the plunge.
Old 11-23-2009, 12:09 PM
  #25  
Former Sponsor
Thread Starter
iTrader: (64)
 
Race Roots's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 2,364
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 2tone
wow, i let this slip my mind in the hopes i wouldn't want them still...ha ha. i'm definitely interested. i'm not sure how much life i have on my tein s's, and it's xmas time, so i'm not swimming in money right now!!

any idea on how much a non-group buy set would be? and like others have mentioned, if group buy never hits 10, can we still order these? i'm thinking in january i might be able to take the plunge.
Not likely the prices for doing a few make it not worth it.

I am having to buy 50 sets so if it doesnt pick up rapidly it isnt going to happen, I can delay it as much as possible until more get in on it but everyone has to be willing to cooperate.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Exclusive Progress AutoX Springs Group Buy!!



All times are GMT -5. The time now is 07:26 PM.