enkei threaded lugs wont fit!!?? please help
#1
Registered User
Thread Starter
Join Date: Aug 2009
Location: DFW, Texas
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
enkei threaded lugs wont fit!!?? please help
okay so i got a set of enkei J10s, will git the 5 lug design, but the lugs are threaded and they actually go into the wheel hub, this will not work because the wheel hub on stock 8's just need a nut, and the stock nuts are too big, so will these solve my problem? (yes, i searched)
http://www.summitracing.com/parts/GO...5&autoview=sku
PLEASE HELP
http://www.summitracing.com/parts/GO...5&autoview=sku
PLEASE HELP
#3
DO NOT, get those Gorillas... If you take your wheels off more than once or twice you will have to buy another set, to get a new key, becuase it strips the inside out. No matter how careful you are... ^Get one of those. But if you must know... those will fit, when you buy them you need "tuner nuts" of some type.
Last edited by Burton; 09-05-2009 at 06:33 PM.
#5
What am I doing here?
Join Date: Mar 2006
Location: 2017 Miata RF Launch Edition
Posts: 3,606
Received 649 Likes
on
510 Posts
DO NOT, get those Gorillas... If you take your wheels off more than once or twice you will have to buy another set, to get a new key, becuase it strips the inside out. No matter how careful you are... ^Get one of those. But if you must know... those will fit, when you buy them you need "tuner nuts" of some type.
Thread
Thread Starter
Forum
Replies
Last Post
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM