Camber suggestions?
#1
Life begins @ 30 psi
Thread Starter
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
Camber suggestions?
I haven't really delved into fine tuning my suspension before and I'm starting to make a few changes to my current setup. I have OEM Tokiko (Shinka) shocks with Tein S-Tech springs, Enkei RPF1 18x9.5 wheels with 165/35/18 tires. I have been doing some aggressive canyon carving recently and decided to add a bit more negative camber. I'm now running -1.5% and it seems reasonable, but I was curious what other people are running with similar setups for both track and street.
#3
Registered
I haven't really delved into fine tuning my suspension before and I'm starting to make a few changes to my current setup. I have OEM Tokiko (Shinka) shocks with Tein S-Tech springs, Enkei RPF1 18x9.5 wheels with 165/35/18 tires. I have been doing some aggressive canyon carving recently and decided to add a bit more negative camber. I'm now running -1.5% and it seems reasonable, but I was curious what other people are running with similar setups for both track and street.
Dude, you've embarassed yourself. You have a zillion posts on this site and you're asking a generic camber question? There is total overkill info on camber. Read, read, read, read.
#4
mkuhnracing.com
iTrader: (3)
165/38/18? Man you are on some tiny tires
If your only doing aggressive driving on the street, then you dont need anything more than -1.5 degrees, not %, of camber. Currently i'm running -2.4 in the front and -2.2 in the rear. But I AutoX and do Track days frequently.
Check out this thread, it will tell ya all you need to know. https://www.rx8club.com/rx-8-racing-25/alignment-settings-street-track-use-43308/
If your only doing aggressive driving on the street, then you dont need anything more than -1.5 degrees, not %, of camber. Currently i'm running -2.4 in the front and -2.2 in the rear. But I AutoX and do Track days frequently.
Check out this thread, it will tell ya all you need to know. https://www.rx8club.com/rx-8-racing-25/alignment-settings-street-track-use-43308/
#5
Life begins @ 30 psi
Thread Starter
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
Thanks kster for the thread link, I'm reading through it now.
#7
Administrator
iTrader: (7)
165 tire on a 9.5 wide?!
#8
Life begins @ 30 psi
Thread Starter
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
165/38/18? Man you are on some tiny tires
If your only doing aggressive driving on the street, then you dont need anything more than -1.5 degrees, not %, of camber. Currently i'm running -2.4 in the front and -2.2 in the rear. But I AutoX and do Track days frequently.
Check out this thread, it will tell ya all you need to know. https://www.rx8club.com/showthread.php?t=43308
If your only doing aggressive driving on the street, then you dont need anything more than -1.5 degrees, not %, of camber. Currently i'm running -2.4 in the front and -2.2 in the rear. But I AutoX and do Track days frequently.
Check out this thread, it will tell ya all you need to know. https://www.rx8club.com/showthread.php?t=43308
I spent a good portion of the morning trying to sort out an overboosting problem, followed by some random adjustments to my suspension which was out of alignment so I decided to go for a more aggressive camber angle without really knowing what I was shooting for. Thanks for the suggestion.
Thread
Thread Starter
Forum
Replies
Last Post
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM
titaneum_grey
Series I Trouble Shooting
7
09-16-2015 11:51 PM