Calling all Forgestar F14's
#126
I am THAT guy
iTrader: (1)
I almost had my wheels last week... almost... Drove like mad in the rain for 2 hours to get to the store to pick up the wheels/tires. We made it juuust in time, walked in and looked through a little window at the wheels. I said, 'those aren't the right color.' Walked through the door and looked at them closer and I said again, 'those aren't the right color.' My BF did a little damage control and told me to wait outside. I was LIVID. Paperwork says gunmetal, boxes say gunmetal, wheels are matte black. Forgestar packed the wrong wheels. 4 hour round trip in crappy weather to have the wrong wheels.
So, I can only hope the RIGHT ones come in before I have to put the 8 away for the winter. It already snowed this morning!!
So, I can only hope the RIGHT ones come in before I have to put the 8 away for the winter. It already snowed this morning!!
Hope they get your wheels soon
#128
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rotaryfx.com/product_p/lig1051.htm
I have the rotaryfx.com markers so no reflector and the pic appears to fill but they don't with the vLED's LED's. Probably due to how bright the LED is. I will take a picture with the forgestars to illustrate what I am talking about.
The pic rotaryfx.com has is misleading in my opinion but then again I have not seen them with there LED's.
#129
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
I almost had my wheels last week... almost... Drove like mad in the rain for 2 hours to get to the store to pick up the wheels/tires. We made it juuust in time, walked in and looked through a little window at the wheels. I said, 'those aren't the right color.' Walked through the door and looked at them closer and I said again, 'those aren't the right color.' My BF did a little damage control and told me to wait outside. I was LIVID. Paperwork says gunmetal, boxes say gunmetal, wheels are matte black. Forgestar packed the wrong wheels. 4 hour round trip in crappy weather to have the wrong wheels.
So, I can only hope the RIGHT ones come in before I have to put the 8 away for the winter. It already snowed this morning!!
So, I can only hope the RIGHT ones come in before I have to put the 8 away for the winter. It already snowed this morning!!
#131
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
I've waited 4 years to do this to my car and now you say this...Like I tell my girlfriends 4 year old son all the time..."I kick your butt!"
Last edited by cavemancan; 11-08-2010 at 11:08 PM.
#132
Stealthy Bunny
Join Date: Apr 2008
Location: Connecticunt
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Just found out that they actually painted them matte black by mistake... and now it will be 3 weeks (AGAIN!) until they ship out the right ones. I just hope they let the paint cure enough...
#134
Rotarydude
iTrader: (8)
Join Date: Jan 2002
Location: Union City, CA
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
They were more than willing to re-drill them, but I would've had to dismount and remount the tires at my expense then ship them. Totally my fault for not checking. So I just use Honda Lugnuts which isn't too bad but not what I wanted.
Regards,
#135
Stealthy Bunny
Join Date: Apr 2008
Location: Connecticunt
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear about your situation. When you get the right set, make sure they drilled the lug pattern as an acorn type. Unfortunately for me (and possibly other folks) I got mine with them drilled as a ball seat. I didn't check them before I mounted and balanced my tires and found out after-wards.
They were more than willing to re-drill them, but I would've had to dismount and remount the tires at my expense then ship them. Totally my fault for not checking. So I just use Honda Lugnuts which isn't too bad but not what I wanted.
Regards,
They were more than willing to re-drill them, but I would've had to dismount and remount the tires at my expense then ship them. Totally my fault for not checking. So I just use Honda Lugnuts which isn't too bad but not what I wanted.
Regards,
#138
SARX Legend
iTrader: (46)
Just in case you guys were wondering, I had Hoss-05's Forgestars sitting here and decided to weigh them.
http://www.flickr.com/photos/9krpmrx8/5192606843/http://www.flickr.com/photos/9krpmrx8/5192606843/ by http://www.flickr.com/people/9krpmrx8/, on Flickr
http://www.flickr.com/photos/9krpmrx8/5192606843/http://www.flickr.com/photos/9krpmrx8/5192606843/ by http://www.flickr.com/people/9krpmrx8/, on Flickr
#141
Sorry to hear about your situation. When you get the right set, make sure they drilled the lug pattern as an acorn type. Unfortunately for me (and possibly other folks) I got mine with them drilled as a ball seat. I didn't check them before I mounted and balanced my tires and found out after-wards.
They were more than willing to re-drill them, but I would've had to dismount and remount the tires at my expense then ship them. Totally my fault for not checking. So I just use Honda Lugnuts which isn't too bad but not what I wanted.
Regards,
They were more than willing to re-drill them, but I would've had to dismount and remount the tires at my expense then ship them. Totally my fault for not checking. So I just use Honda Lugnuts which isn't too bad but not what I wanted.
Regards,
#143
OMGITM!
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
I wonder if the demand for Forgestars is really so great that they can't keep up, or if their quality control is just garbage. They seem to have a horrible history of issues...
#145
Row faster, I hear banjos
iTrader: (5)
Join Date: Jul 2003
Location: Charlottesville, VA
Posts: 2,217
Likes: 0
Received 0 Likes
on
0 Posts
Has any RX-8 owner had breakage issues with these wheels? I'm trying to decide between the F14's and the 18x10 +38 RPF1's and the 18x10.5 +38 PF01's. These will be used for autocross.
#146
The Angry Wheelchair
iTrader: (14)
I haven't heard of issues of the F14 on an Rx8, mostly due to our car's low weight contrast to heavier cars that run them like the bimmers, some of the owners have complained about them but again they weigh 800~1000lbs more than our vehicles.
They are in reality, a cast wheel. They state flow formed forged rims, but in reality it's not a true forged wheel. That being said, I've gone over really nasty bumps on back roads and highways all over and still didn't bend them while running stiff coilovers. Now, going off the shoulder of a road where it dropped 4 inches to the ground unexpectedly is another matter and resulted in bending 2 of my rims with the more extreme one having crack on the inner lip. I had a specialist straighten and make a clean cut to weld it up which to date after 10~12k miles, still is holding up fine.
My rims are 18x10 +28 and weigh roughly 21lbs.
They are in reality, a cast wheel. They state flow formed forged rims, but in reality it's not a true forged wheel. That being said, I've gone over really nasty bumps on back roads and highways all over and still didn't bend them while running stiff coilovers. Now, going off the shoulder of a road where it dropped 4 inches to the ground unexpectedly is another matter and resulted in bending 2 of my rims with the more extreme one having crack on the inner lip. I had a specialist straighten and make a clean cut to weld it up which to date after 10~12k miles, still is holding up fine.
My rims are 18x10 +28 and weigh roughly 21lbs.
#148
Registered User
Join Date: Mar 2009
Location: Adelaide, Australia
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Finally got my F14, after like 4+ months wait...
I have to say even photos don't do the wheels justice, you have to see in person to fully realise the aggressive stance these wheels create.
I'm lowered on Tanabe GF + OEM shock, no guard mod etc, no scrub so far, rear guard miss by about 5mm...
Rim and tyre size: the magical 18x10 +42 on 265/35/18 all round, the rear has about 5mm clearance before guard rolling is needed, front tyre is dead on flush.
now the photos:
I have to say even photos don't do the wheels justice, you have to see in person to fully realise the aggressive stance these wheels create.
I'm lowered on Tanabe GF + OEM shock, no guard mod etc, no scrub so far, rear guard miss by about 5mm...
Rim and tyre size: the magical 18x10 +42 on 265/35/18 all round, the rear has about 5mm clearance before guard rolling is needed, front tyre is dead on flush.
now the photos:
Last edited by Kusanagi; 06-02-2011 at 05:41 AM.