kevink0000

Just posting this here because I could not find this info readily though it may have already been posted, and is buried somewhere.

So People of the Future can easily find:


From Bilstein, my questions in blue.
1. Is the valving different between the B6 and B8 versions?

No, they are the same in that regard.



2. Is the shock body length different between the B6 and B8 versions?

Yes, the B8 is shorter in order to better capture a lowering spring, please see the extended and collapsed length for all 4 dampers below.


24-110044 – B6 Front

Bilstein Collapsed Length (IN)- 17.07

Bilstein Extended Length (IN)- 19.94



24-110068 - B8 Front

Bilstein Collapsed Length (IN)- 17.07

Bilstein Extended Length (IN)- 19.35



24-110051- B6 Rear

Bilstein Collapsed Length (IN)- 17.91

Bilstein Extended Length (IN)- 22.56



24-110075 – B8 Rear

Bilstein Collapsed Length (IN)- 17.91

Bilstein Extended Length (IN)- 21.77

Our B6 can run both Lowered or Stock springs as were our B8’s are designed specially around lowering springs. If you have any further questions, please feel free to contact us again. Thank you.



Kind Regards,
xxxxxxxxxxxxxxxxx
Tech/Warr Support Specialist
thyssenkrupp Bilstein of America, Inc

Chrishoky

iTrader: (9)

I have B8's all around on Tein S-tech springs. It's a nice combo.

TeamRX8

iTrader: (25)

B6 on stock springs … 🤔
​​​​​​.

kevink0000

That is what I have at the moment. I thought the Ohlins would be in the budget in 2023, but they are not. My stock 230k suspension was totally done, and I needed a quick/cheaper remedy as a temporary measure, and the Bilsteins fit the bill(stein).

So far so good. They are pretty nice actually, for a DD. Plush and pretty well damped with the stock springs.

TeamRX8

iTrader: (25)

I might suggest the non-adjustable Koni SRT shocks as an alternative, but honestly you can’t go wrong on either brand imo

this is the Bilstein page comparing the B4, B6, and B8, though not in the detail provided earlier in the thread

https://workshop.bilstein.com/en-us/...ison-b4-b6-b8/

.

kevink0000

My son has the SRT on his Mustang GT, and they are good. I probably would have gone with them instead of the Bilstein but could not find stock quickly. Barely found the Bilsteins as it was.

I tried both Bilstein B8 and Koni Yellow on my e34 BMW and the Koni's are superior with Vogtland springs. The front Bilsteins would crash right to the bump stop at certain times with a specific frequency and amplitude of dip in the road. It drove me nuts.

But, I like both brands. We have Bilsteins on almost everything now, from B4 to B8.

kevink0000

Forgot to add I had a warranty claim on an ancient Bilstein HD on a BMW that leaked. It came with the car when I bought it. I didn't have a receipt, and they sent me a free replacement after I gave them the numbers on the shock. I had to send the shock in for inspection to keep from getting charged but it was totally seamless. Great company.