good luck! lowered mine yesterday

 

nice ride bro ^

Munchy what kind of wheels you looking to get!

 

i dont know yet, probably varrstoen's, maybe something else.

 

^ ive been looking at the 331s in a 18x10.5 +30 if i can get rid of my piaa super rozzas. I want a wider squared set up. Then powder coat mag blue or similar, though im not sure i can pull that color off.

 

Yesss.... I think i finally qualify to be in this thread, been waiting on this for a while!
Rota Grid 18x9.5 +20 Advan A13 240/40/18... I love the way it sits and looks!!! Just one problem, already rolled the fenders, but the rear tab is rubbing on the wheel.. Any suggestions?
More pictures later.

 

Cut them off.

 

Pretty much grind that tab all the way off.

 

Thanks guys. I'll be on it tomorrow!!

 

to everyone, what's your mesure from ground to fender? im at 12 1/4 all around and im rubbing on speed bumps. i might raise it a bit to 12 1/2

 

ground to fender?? i think you mean center of the wheel to fender, no? ground to fender i'm probably at like 23ish. centercap to fender i'm around 11.5ish

 

Theres a lot beforew i dive in and make this purchase will this size fit.

18x9 +25
18x10.5 +20 im not sure of the tire size just yet

 

^go wider in front

 

do 9.5 in the front and maybe a tiny better offset

 

The bad thing is the wheels come in that size then they jump up to a 20" which I don't want to run I like to run them in the 18 but im thinking about the rub with the 18x10.5 but if I can get it to work ill run them

 

 

Already fix the tab issue! No rubbing anymore, after an alignment today, drives like a dream!!

 

nice shot willnordacgreen1211 !!!

 

Hey bro what are your specs?

 

XXR's?

 

/\
Rota grids

 

Yeah there xxrs lol I'm cracked one of my wheels started leaking real bad so I'm just want a quick set for now.

 

Rota Grid 18x9.5 +20, Advans a13 245/40/18

 

I test fitted the 521 18x8.5 +25 and 18x10.5 +25 the fronts were good just some fender rolling and you could call it a day the rear do need some work but some negative camber trimming the tab and a fender roll and you should be good. The tires that I was using were 245/40 and 275/35. hope this helps

 

How much is some negative camber lol? -12?

 

I would like to know to because right now I alredy have 19x9.5s on the back with a 275/35/19 rolled and tabs already cut with no issues. And the off set now is a +30