25MM spacers with stock wheels and 245/40-18's = Flush :)
09-28-2018, 08:33 AM
#377
wheel specs ? The thread title is for stock wheels with 25mm spacers with 245/40/18 and no lowering. I have this exact combination and fronts poke out beyond fenders as a couple before have reported so not flush. Had a passenger last night and rubbed on all corners rears are rolled. So lowering would create more rubbing ?
https://www.rx8club.com/series-i-whe...2/#post3535605
When you lower the car you get an alignment that usually has more negative camber than stock so what pokes out at stock height could be flush when lowered. And also the springs are stiffer so lowering it would not necessarily mean more rubbing.
Last edited by J8635621; 09-28-2018 at 08:35 AM.
10-05-2018, 07:07 AM
#380
Registered
The entire thread is based around a car that is lowered, not stock.
https://www.rx8club.com/series-i-whe...2/#post3535605
When you lower the car you get an alignment that usually has more negative camber than stock so what pokes out at stock height could be flush when lowered. And also the springs are stiffer so lowering it would not necessarily mean more rubbing.
https://www.rx8club.com/series-i-whe...2/#post3535605
When you lower the car you get an alignment that usually has more negative camber than stock so what pokes out at stock height could be flush when lowered. And also the springs are stiffer so lowering it would not necessarily mean more rubbing.
Thread
Thread Starter
Forum
Replies
Last Post
Phantom Menace
Series I Wheels, Tires, Brakes & Suspension
20
04-23-2007 08:11 PM
