WTF is wrong with the Heater!!!!
#1
WTF is wrong with the Heater!!!!
Hey guys I need some help I have a 2005 Rx8 and it just got cold here in kentucky about a month ago and at first my heater worked fine now all it does is blow cold air but every now and then it will work for maybe 15mins and then will start blowing cold air????? any suggestion on what could be the problem and how much will it cost?
#2
"13B vs. Renesis" Discuss
iTrader: (28)
https://www.rx8club.com/showthread.p...ght=heater+fix
^ shows whats wrong.
Your car can display the heater level on a scale of 0-16 (0=cold 16=hot)
Your car will display this by hold the power button and the seek up button at the same time.
You can follow the fix above, or, take the temp control **** off and (very ghetto) jam some paper or something else in there to get heat until you feel like fixing it.
^ shows whats wrong.
Your car can display the heater level on a scale of 0-16 (0=cold 16=hot)
Your car will display this by hold the power button and the seek up button at the same time.
You can follow the fix above, or, take the temp control **** off and (very ghetto) jam some paper or something else in there to get heat until you feel like fixing it.
#3
Registered User
Join Date: Sep 2007
Location: Louisville, KY
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
I just fixed this on my '04 last weekend. Took the circuit board out & soldered. If you're in/around Louisville, and too afraid to do it, come by sometime and we can take care of it.
Dealer will charge a fortune, as the circuit board is +/- $300 plus labor...
Dealer will charge a fortune, as the circuit board is +/- $300 plus labor...
#5
how much would you charge me to do this
Last edited by kah6987; 01-08-2009 at 09:25 AM.
#6
Registered User
Join Date: Sep 2007
Location: Louisville, KY
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
#12
I checked the fuses and they were all good and then I took it all apart and rechecked all connections and put it back in and it work fine so its all good. thanks everybody for the help
Thread
Thread Starter
Forum
Replies
Last Post
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM