Originally Posted by kevinande

Based on the information you provided the most logical conclusion is that one of your fans has died or the relay to that fan(s) has died. I would check in that first and foremost before I started messing around "clogs". If air is not passing over the condenser you can not remove heat, therefore the system can not cool. Once you start moving the air flow is there and the system does what it was designed to do. When there is no air flow pressure builds and could account for the readings you were getting on the gauges. Look at the fans first and go from there. Good luck.

Originally Posted by Renesis Noob

Let me clarify, it was a Tad low on freon and we put more in, might be too much, would too high of pressure drag the compressor?