Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

open door senser

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-09-2010, 08:16 PM
  #1  
Registered User
Thread Starter
 
ridered05's Avatar
 
Join Date: Oct 2010
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
open door senser

ok so i dont know why but when i am driving my senser for a open door starts going off. the light on the dash starts to blink, inside lights turn on and there is a clicking sound from around the glove box. does anyone know why this might be happening?
Old 10-09-2010, 10:16 PM
  #2  
Surf Hard, Drive Hard
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
Yeah, it thinks your door is open!

Guess I would start by looking at the door latch mechanism. Open the front door and remove the two screws on the rear door that hold it in place. Actually, make sure those screws are tight as I think the outside of it is ground and needs to make good contact with the frame of the door. Anyway, I would remove it and take a look. There isn't a lot of wire length on these, but pull it out and make sure the connections look okay. If after putting it back in that doesn't do it, then you may have to buy a new one? Think I've seen them for like $6.00 or so.
Old 10-10-2010, 10:25 AM
  #3  
Registered User
Thread Starter
 
ridered05's Avatar
 
Join Date: Oct 2010
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
ok thanks. i will try that. i just found it odd because it would do it for about 10-15 seconds then stop then a while later it would do the same thing
Old 10-10-2010, 02:30 PM
  #4  
Registered User
Thread Starter
 
ridered05's Avatar
 
Join Date: Oct 2010
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
ok so here is a little more info. when i came to my car the otherday the radio didnt work and i found that the fuse was blown for it which was also making my power locks not work. i replaced the fuse and that is when this started happening. it blew that fuse within the next day. i have not had a chance to check the senser but if the wires look good on it is there any way to know if it is bad or not? also is there anything else that might be causeing this?
Old 10-10-2010, 09:56 PM
  #5  
Administrator
 
zoom44's Avatar
 
Join Date: Jul 2002
Location: portland oregon
Posts: 21,958
Received 115 Likes on 88 Posts
more info about your car- what has been changed from stock?
Old 10-11-2010, 02:37 AM
  #6  
Registered User
Thread Starter
 
ridered05's Avatar
 
Join Date: Oct 2010
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
all stock other than a k&n intake. i changed the plugs and coils on it a couple days ago and put a stright mid pipe on it because i was getting a miss fire code but i changed all that the day after i started to have the problem. also if i dont pull the fuse my alarm will start to go off because at some point the car seems to think the door is open
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
18
04-17-2021 07:43 AM
Jst4fun
RX-8 Parts For Sale/Wanted
9
03-05-2021 07:16 PM
nferguson88
RX-8 Parts For Sale/Wanted
1
10-06-2015 12:45 PM
cliffkemp
Series I Trouble Shooting
7
10-03-2015 11:11 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: open door senser



All times are GMT -5. The time now is 01:16 PM.