need help now
#1
FULLY SEMI AUTOMATIC
Thread Starter
iTrader: (9)
need help now
lets start by sayinng donnt mind my typinng my laptop needs a new keyboard annd ive been working on my own cars all my life. dad, bro, stepmom are all ase certified.
anyway, i want good spark for dyno day on sat.
heres what i did today
oil change-not importannt
cleaned mass air flo sensor
took out battery, cleaned terminals-posts and sprayed with protectant i know the computer will take a few drives to reset, this might be the problem?
replaced factory wires with racing beat ones, tripplle checked connections
car idels better at about 900 steady.
replaced plugs wich is anoter problem i put ngk 7 and 9s in but the old plugs i took out which were channged by mazda with previous ownner were 6 and 9s?
whaats that about?
anyway after working on my car today i get a stumble/misfire at 6-7k and 7-8k
is this just the computer relearninng?
my new coils should be in tommorrow annd will channge them
i swapped plugs/wires one at a time
car history
69k
new motor at about 30k
new trans at 50k
oil chaged every 2500
mods
ur ud pullies
k&n intake
ap header back
rb wires
zex not important now
other mods should not mnatter
please set my mind at ease and tell me its just thhe computer relearning
anyway, i want good spark for dyno day on sat.
heres what i did today
oil change-not importannt
cleaned mass air flo sensor
took out battery, cleaned terminals-posts and sprayed with protectant i know the computer will take a few drives to reset, this might be the problem?
replaced factory wires with racing beat ones, tripplle checked connections
car idels better at about 900 steady.
replaced plugs wich is anoter problem i put ngk 7 and 9s in but the old plugs i took out which were channged by mazda with previous ownner were 6 and 9s?
whaats that about?
anyway after working on my car today i get a stumble/misfire at 6-7k and 7-8k
is this just the computer relearninng?
my new coils should be in tommorrow annd will channge them
i swapped plugs/wires one at a time
car history
69k
new motor at about 30k
new trans at 50k
oil chaged every 2500
mods
ur ud pullies
k&n intake
ap header back
rb wires
zex not important now
other mods should not mnatter
please set my mind at ease and tell me its just thhe computer relearning
#3
U-Stink-But-I-♥-U
iTrader: (1)
Join Date: Mar 2005
Location: 12 o'clock on the Beltway.
Posts: 2,004
Likes: 0
Received 1 Like
on
1 Post
I should also mention that you should remember to disable (completely) the DSC when dynoing.
3 drive cycles is more than enough to relearn ft.
As for cleaning the maf, if you know what you are doing, you should be fine, but if you did screw something up, I dont think it would throw a misfire code.
As for plugs, I dont see the having incorrect heats being part of a misfire issue. But you should use (or at least read up on) the standard heats for NA and one step colder on leading and trailing for turbo.
3 drive cycles is more than enough to relearn ft.
As for cleaning the maf, if you know what you are doing, you should be fine, but if you did screw something up, I dont think it would throw a misfire code.
As for plugs, I dont see the having incorrect heats being part of a misfire issue. But you should use (or at least read up on) the standard heats for NA and one step colder on leading and trailing for turbo.
#4
FULLY SEMI AUTOMATIC
Thread Starter
iTrader: (9)
car is na. just thought it was strange thatr the plugs i took out were wrong.
i have no cell at the moment- batt dis connect
i dont have dsc
my car is just running weird at 6-7k and 7-8k after the work annd i double checked everything.
i hope its just the computer relearnig but i wanted opioins
thhanks
i have no cell at the moment- batt dis connect
i dont have dsc
my car is just running weird at 6-7k and 7-8k after the work annd i double checked everything.
i hope its just the computer relearnig but i wanted opioins
thhanks
#5
Extraordinary Engineering
lets start by sayinng donnt mind my typinng my laptop needs a new keyboard annd ive been working on my own cars all my life. dad, bro, stepmom are all ase certified.
anyway, i want good spark for dyno day on sat.
heres what i did today
oil change-not importannt
cleaned mass air flo sensor
took out battery, cleaned terminals-posts and sprayed with protectant i know the computer will take a few drives to reset, this might be the problem?
replaced factory wires with racing beat ones, tripplle checked connections
car idels better at about 900 steady.
replaced plugs wich is anoter problem i put ngk 7 and 9s in but the old plugs i took out which were channged by mazda with previous ownner were 6 and 9s?
whaats that about?
anyway after working on my car today i get a stumble/misfire at 6-7k and 7-8k
is this just the computer relearninng?
my new coils should be in tommorrow annd will channge them
i swapped plugs/wires one at a time
car history
69k
new motor at about 30k
new trans at 50k
oil chaged every 2500
mods
ur ud pullies
k&n intake
ap header back
rb wires
zex not important now
other mods should not mnatter
please set my mind at ease and tell me its just thhe computer relearning
anyway, i want good spark for dyno day on sat.
heres what i did today
oil change-not importannt
cleaned mass air flo sensor
took out battery, cleaned terminals-posts and sprayed with protectant i know the computer will take a few drives to reset, this might be the problem?
replaced factory wires with racing beat ones, tripplle checked connections
car idels better at about 900 steady.
replaced plugs wich is anoter problem i put ngk 7 and 9s in but the old plugs i took out which were channged by mazda with previous ownner were 6 and 9s?
whaats that about?
anyway after working on my car today i get a stumble/misfire at 6-7k and 7-8k
is this just the computer relearninng?
my new coils should be in tommorrow annd will channge them
i swapped plugs/wires one at a time
car history
69k
new motor at about 30k
new trans at 50k
oil chaged every 2500
mods
ur ud pullies
k&n intake
ap header back
rb wires
zex not important now
other mods should not mnatter
please set my mind at ease and tell me its just thhe computer relearning
Check the MAF rubber O-ring
Check that the screws are tightening down (not stripped)
Last edited by DarkBrew; 10-20-2010 at 09:08 PM.
#6
FULLY SEMI AUTOMATIC
Thread Starter
iTrader: (9)
double checked mas and o ring. no issue.
i might just being crazy, but dont want to f up my car
please advise
thanks jesse
ps if a mod checks this please deleate my half *** thread, but not this one
i might just being crazy, but dont want to f up my car
please advise
thanks jesse
ps if a mod checks this please deleate my half *** thread, but not this one
#9
FULLY SEMI AUTOMATIC
Thread Starter
iTrader: (9)
no cel yet, but waiting for it-midpipe. coils should be in today but i didnt have this problem before doing the work? no cobb. im still confused about the wrong plugs in my car, mazda put them in right before i got it, i checked with the dealer on this. im gonna put new coils in as soon as i get them and hope that helps but i didnt have this issue before. im really worrier about the plugs i took out, should i be? it ran fine
#11
Extraordinary Engineering
[QUOTE=200.mph; just thought it was strange thatr the plugs i took out were wrong.
[/QUOTE]
Plugs
Yeah, that's weird.
Please please please post pics of the leading plugs you removed!
[/QUOTE]
Plugs
Yeah, that's weird.
Please please please post pics of the leading plugs you removed!
Last edited by DarkBrew; 10-21-2010 at 08:01 PM.
#12
FULLY SEMI AUTOMATIC
Thread Starter
iTrader: (9)
plugs removed were normal looking for 30k,but idk how to post pics. im sure the new plugs are the right ones.
anyway update, i re checked everything and one of my new trailing plugs got a hairline crack in the porclin. after i replaced it with a new one things are back to normal.
a big thanks for all your help, you guys rock
jesse
anyway update, i re checked everything and one of my new trailing plugs got a hairline crack in the porclin. after i replaced it with a new one things are back to normal.
a big thanks for all your help, you guys rock
jesse