Navigation System Issues (power button does not work)
08-23-2011, 01:08 PM
#1
New Member
Thread Starter
iTrader: (2)
Join Date: Sep 2010
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Navigation System Issues (power button does not work)
I originally posted this in the Tech Garage, though I fear it was the wrong place. In any case, I apologize for the potential duplication.
Anyways!
I've recently had an issue with my Navigation System in my 2005 GT. A few weeks ago I pressed the button to open the LCD display. The display opened (with audible beep), but then immediately closed. Since then, I have been unable to open the LCD display with the button (and no audible beep is heard).
When I press the button, I hear no noise at all (no sound of a struggling motor, nothing). If I open the LCD screen manually until it clicks, it immediately closes itself. If I open the LCD completely passed where it clicks, it remains open (but not on). Once in a blue mood after opening manually, it will briefly display the 'Do not operate while driving' screen, then immediately shut off and close itself.
I came across this TSB: http://www.finishlineperformance.com...3-04-1358b.pdf
It doesn't reflect exactly what is happening with myvehicle, but I attempted it anyways. It did not work.
Power is getting the LCD unit (evident when I can sometimes get it to display the warning), however it cannot get it to stay open. I should point out that when I initially checked the room fuse, it was slightly out of place in the fuse panel. it was still making a connection, but it had been jammed to the left (so I suppose it's possible there was intermittent connections ... though my radio settings never reset themselves). I have checked all fuses and all are intact.
Does anybody have any ideas before I dismantle the dash to check for loose wiring???
Anyways!
I've recently had an issue with my Navigation System in my 2005 GT. A few weeks ago I pressed the button to open the LCD display. The display opened (with audible beep), but then immediately closed. Since then, I have been unable to open the LCD display with the button (and no audible beep is heard).
When I press the button, I hear no noise at all (no sound of a struggling motor, nothing). If I open the LCD screen manually until it clicks, it immediately closes itself. If I open the LCD completely passed where it clicks, it remains open (but not on). Once in a blue mood after opening manually, it will briefly display the 'Do not operate while driving' screen, then immediately shut off and close itself.
I came across this TSB: http://www.finishlineperformance.com...3-04-1358b.pdf
It doesn't reflect exactly what is happening with myvehicle, but I attempted it anyways. It did not work.
Power is getting the LCD unit (evident when I can sometimes get it to display the warning), however it cannot get it to stay open. I should point out that when I initially checked the room fuse, it was slightly out of place in the fuse panel. it was still making a connection, but it had been jammed to the left (so I suppose it's possible there was intermittent connections ... though my radio settings never reset themselves). I have checked all fuses and all are intact.
Does anybody have any ideas before I dismantle the dash to check for loose wiring???
Thread
Thread Starter
Forum
Replies
Last Post
rotarywanker
Series I Interior, Audio, and Electronics
3
12-08-2022 05:56 PM
blkswan
Series I Interior, Audio, and Electronics
1
09-07-2015 01:23 AM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
