HELP!! Immobilizer system issue
#1
Unbalanced & Unmedicated
Thread Starter
HELP!! Immobilizer system issue
I was doing the fog light rewire per the DIY sticky. I must have done something incorrectly because after the procedure the fog lights didn't come on at all.
So I reconnected the wire back to stock, and checked, all lights worked fine including the fogs and the car started normally. At that point I decided to leave it alone until I got further clarification.
Twenty minutes later I went out to head to Radio Shack and the car won't start.
Turn the key and get nothing! No crank, no clicking. Just a door ajar light and the flashing immobilizer symbol on the dash. I disconnected the battery, reconnected it, still nothing. Any suggestions??? I'm seriously stuck here and a search on the forum doesn't really answer how to disable or reset the immobilizer system.
So I reconnected the wire back to stock, and checked, all lights worked fine including the fogs and the car started normally. At that point I decided to leave it alone until I got further clarification.
Twenty minutes later I went out to head to Radio Shack and the car won't start.
Turn the key and get nothing! No crank, no clicking. Just a door ajar light and the flashing immobilizer symbol on the dash. I disconnected the battery, reconnected it, still nothing. Any suggestions??? I'm seriously stuck here and a search on the forum doesn't really answer how to disable or reset the immobilizer system.
#3
Unbalanced & Unmedicated
Thread Starter
Thanks RX8XTC. It turns out I cooked the ignition fuse in my first attempt to do the fog light rewire. All good now, it starts and the fogs work independently.
Thread
Thread Starter
Forum
Replies
Last Post
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM
Nisaja
RX-8 Discussion
51
09-01-2015 04:29 AM
TomX8
New Member Forum
0
08-29-2015 09:37 AM
2004, bypass, dash, disable, disables, disabling, immobiliser, immobilizer, imobulizer, inmobilizer, mazda, problem, reset, rx8, system