Help!!! Again enthusiasm has scuppersdme!!!
#1
Registered
Thread Starter
Join Date: Mar 2011
Location: Sunderand, UK
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Help!!! Again enthusiasm has scuppersdme!!!
So... I appear to have blown my diff this morning, with an emergency start.... Er hum!! In gear the drive shaft is turning but a mighty uncomfortable grinding from the rear. Which models of diff are compatible. I have a 2005 6 speed 231 manual. And I feel hurt she didn't like my tough love. Please help anyone. Also is there anything specific I should look at when changing it, new seals etc.
Thanks in advance.
I've looked for a DIY but couldn't track one down....
Thanks in advance.
I've looked for a DIY but couldn't track one down....
Last edited by Jonah; 03-24-2014 at 07:21 AM. Reason: Manual note added
#2
Registered
Thread Starter
Join Date: Mar 2011
Location: Sunderand, UK
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Sorted!! Any manual diff is apparently the answer!!! Does any one know if there's any uprated drive shafts i could use as the originals twisted off like plastic!!
Last edited by Jonah; 04-01-2014 at 12:00 PM. Reason: Spelling
#3
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 240 Likes
on
110 Posts
The stock ones can take any power the stock engine can throw at it. If you are really putting down lots of power though, you might try these: Black Halo Racing Axle Set | Black Halo Racing
Thread
Thread Starter
Forum
Replies
Last Post