Choking/Clogging Noise
#1
Get reddy for TURBO 8
Thread Starter
Join Date: Mar 2004
Location: Atlantic City, NJ
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Choking/Clogging Noise
My car recently started making this funky noise almost like it was choking or drowning. I changed the oil (full synthetic), changed the spark plugs, and wires, cleaned the k&n filter. Still making the noise when I get to approximately 5600 rpm. Anybody had a similar issue and solved it?
My Mods are:
2004 8 w/ ACT Flywheel, stage 1 clutch, k&n typhoon V.1, Grddy SP2 Catback exhaust. Taylor Racing wires, NGK Iridium Spark plugs
My Mods are:
2004 8 w/ ACT Flywheel, stage 1 clutch, k&n typhoon V.1, Grddy SP2 Catback exhaust. Taylor Racing wires, NGK Iridium Spark plugs
#4
Get reddy for TURBO 8
Thread Starter
Join Date: Mar 2004
Location: Atlantic City, NJ
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about the nOOb question (first time rotary owner) Are the coils the 4 cap at the end of my spark plug wires? And about the cat, I've decide today to get a midpipe to replace that. ty
#5
Registered User
Join Date: Dec 2006
Location: Lake County, Illinois
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I'm having the same issue with my '04 RX-8. My dealer just replaced my cat today and they've got the coil pack on order.
We're thinking that the bad coil let unburnt gas into the cat which caused it to fail prematurely. Hook your car up to a computer and check for misfires. Or you could hook up an old inductive timing light and look for stutters.
Check this other thread for similar issues......
https://www.rx8club.com/series-i-tech-garage-22/how-tell-coils-bad-113744/
We're thinking that the bad coil let unburnt gas into the cat which caused it to fail prematurely. Hook your car up to a computer and check for misfires. Or you could hook up an old inductive timing light and look for stutters.
Check this other thread for similar issues......
https://www.rx8club.com/series-i-tech-garage-22/how-tell-coils-bad-113744/
#7
Registered User
Join Date: Dec 2006
Location: Lake County, Illinois
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I don't know. There are a couple places listed on page three of the thread I mentioned, but I don't have any experience with them.
I only mentioned going to the dealer because you can probably get it all done for free if you're still under warranty.
I only mentioned going to the dealer because you can probably get it all done for free if you're still under warranty.
#8
Get reddy for TURBO 8
Thread Starter
Join Date: Mar 2004
Location: Atlantic City, NJ
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
My warranty days are all gone, but thx for your help. You too will one day roam the vast desolate plains of the unwarranted rotary engine. lol
Thread
Thread Starter
Forum
Replies
Last Post
nowakm99
Series II Technical and Trouble shooting
1
10-09-2015 07:10 AM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM
neoksk
RX-8 Parts For Sale/Wanted
3
09-21-2015 12:31 PM