Check Engine Lights
#101
Registered
Join Date: Jan 2004
Location: Milwaukee Wi.
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
I told the cute cashier when I picked up my 8 at the dealer for reflash that I get fllashed everytime I come in here. She just looked at me like I was refering to her. I explained my car not her.
#103
Registered
Join Date: Sep 2003
Location: Diamond Bar, Ca
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
Man.. I got my car back a few hours ago and the tech stated that my TPMS light was on and didnt even do the flash.. Geez... I am going to call service in the morning. I have been having ongoing issues with my CEL light and I thought they would flash it. The service man even told me he was downloading so that he could put it in my car..
Rrrrrrrrrr.. I shouldnt expect any more from Mazda than what I got by now.
btw, I got a CEL again tonight.. fun times. haha
Rrrrrrrrrr.. I shouldnt expect any more from Mazda than what I got by now.
btw, I got a CEL again tonight.. fun times. haha
#106
Registered
Join Date: Aug 2004
Location: South Surrey, BC Canada
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
I believe the gas line system is pressurized, so it might be that if the cap is open, the fuel system may not perform properly.
I had the same issue with my 8 last week. Took a few "duty cycles" (which I took to mean starting and stopping) before it reset itself... I think it was 10 or so starts or stops. Zoom44 pointed that out IIRC.
That being said, they need a "Check gascap" light.
I had the same issue with my 8 last week. Took a few "duty cycles" (which I took to mean starting and stopping) before it reset itself... I think it was 10 or so starts or stops. Zoom44 pointed that out IIRC.
That being said, they need a "Check gascap" light.
#107
Registered
Join Date: Dec 2004
Location: O'Fallon, MO
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, they told me the same thing at my dealer at first, but the light kept coming on after it went through its "duty cycles". The CEL had been on since I got the car! They took it in and put the latest flash ("N" I believe) on it and it seems to be fine now.
#108
Registered User
Join Date: Jul 2004
Location: South Dakota and Minnesota
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
gas tank
My gas tank was 3/4 full, almost a full tank of 93 octane, that's all i run. Could it possibly be because of my midpipe?! and running no cat? and my o2 simulator is shot?
#109
I guess because our 8's were the first ones, we're bearing the brunt of Mazda's testings since frankly, they didn't make a car that runs too smoothly. There are too many lil problems. I'm not gonna trip about it anymore, though, cuz my 8 is gorgeous.
UberJumper has the world's cutest baby. It needs to be said, and it needs to be said often.
UberJumper has the world's cutest baby. It needs to be said, and it needs to be said often.
#110
My car has done the exact same thing before and I have no mods (except pzero neros!) When driven at high rpm during a friend's test drive of my car it flashed the check engine light and then it did not come back on. Typically my car is driven only moderately hard or just cruising in 6th at 72mph.
Should we be concerned about this?
Should we be concerned about this?
#111
8 the HARD way.
Join Date: Feb 2003
Location: San Antonio
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
Take it in.
I had the same problem when driving the engine hard up to 8K. Dealer found bad plugs the culprit. The problem was Random Misfire. After the plugs were replaced, no CELs and all is good now. (knock on wood) This was about a 1000mi ago.
I had the same problem when driving the engine hard up to 8K. Dealer found bad plugs the culprit. The problem was Random Misfire. After the plugs were replaced, no CELs and all is good now. (knock on wood) This was about a 1000mi ago.
#113
Registered
Join Date: Sep 2003
Location: Diamond Bar, Ca
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
Yup..same here too. I have a CANScan tool and the codes that are being recorded are a P0300 (Random Misfire) and a P0200 (Injector Circuit Malfunction). The dealer's link to Mazda was down today so i'll have to take it to them on Monday. All of my problems started after my 30k service when they cleaned the injectors.. It has to be related. They have replaced my plugs and wires to no avail.
so far
so far
#114
Registered
Join Date: Sep 2003
Location: Diamond Bar, Ca
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, I took my car into Mazda this morning (1/31) and I finally got a call from them at around 4:30. They said that I had a slight fuel leak coming from the 1st injector assembly leaking back into the cylindar. They want to keep the car over night and run a fuel test on it. I'll know more before mid day tomorrow and let you guys know whats going on with it and what they plan on doing.
I just hope this time they find the issue and can correct it. My CEL issues have been going on for months now.. it's getting old
I just hope this time they find the issue and can correct it. My CEL issues have been going on for months now.. it's getting old
#115
CEL diagnosis
this is my first time in this section and i can't believe how shitty the mazda service is for these cars... i can see them not wanting to work on the rx7's and older cars but geez!!!! from crappy repairs to endless waits....
if anyone gets the runaround from the dealer, i've got an obd2 code scanner. if you've got a CEL and just want to know what's causing it, i'm offering to scan the car for free--just make arrangements and drop by.
i'm in hesperia, ca, so this offer only really pertains to the so. cal residents. hope i can help at least a little bit.
if anyone gets the runaround from the dealer, i've got an obd2 code scanner. if you've got a CEL and just want to know what's causing it, i'm offering to scan the car for free--just make arrangements and drop by.
i'm in hesperia, ca, so this offer only really pertains to the so. cal residents. hope i can help at least a little bit.
#116
Evolution of REvolution
Join Date: Feb 2004
Location: Germany
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
I don't see how a leaking fuel injector can cause a misfire MIL. Unless you have lots of carbon on the rotors and the extra fuel is causing extra heat, and hot spots/detonation...
Good luck...
Good luck...
#117
Registered
Join Date: Sep 2003
Location: Diamond Bar, Ca
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
This is the response that I got from Mazda.
The reason why I have the CEL is possibly because of my pulleys. The pulleys are increasing the speed of the engine by underdriving certain components. This is causing the sensors to go outside the bounds that is acceptable before a CEL is issued. The reason why I am smelling the fuel is because this bound has been breached and the system is purging fuel.
If I decide to replace my aftermarket pulleys with OEM, they will send out an engineer to look at it if my problems still persist.
The reason why I have the CEL is possibly because of my pulleys. The pulleys are increasing the speed of the engine by underdriving certain components. This is causing the sensors to go outside the bounds that is acceptable before a CEL is issued. The reason why I am smelling the fuel is because this bound has been breached and the system is purging fuel.
If I decide to replace my aftermarket pulleys with OEM, they will send out an engineer to look at it if my problems still persist.
#118
Registered
Join Date: Sep 2003
Location: Diamond Bar, Ca
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
They also flashed me to 35.5. I was expecting it to be 35.2 because of all the threads stating that is the latest level, so that kind of shocked me a bit. They gave me the print out of what my computer recorded so thats how I know my level. I have gone all of 4 hours without a CEL.. WOW
#120
Originally Posted by Nemesis8
I read somewhere on this forum the following:
There are two reset procedures, one for the NVRAM and the other for the KAM. Neither will erase your radio presets.
1) With the key in the off position, press and hold the odometer reset button and turn the key to on. Continue to hold the odo button until the odometer reads "TEST" and then release.
2) Turn the key to off and repeat step one.
This will reset the entire PCM except the KAM which contains the sensor profiles amongst other things. You can reset it with the familiar procedure:
1) Turn the key to on
2) Depress the brake pedal rapidly 20 times in a row until the oil pressure gauge sweeps to halfway and back again.
I do not know if this is what you are looking for, but please be careful.
There are two reset procedures, one for the NVRAM and the other for the KAM. Neither will erase your radio presets.
1) With the key in the off position, press and hold the odometer reset button and turn the key to on. Continue to hold the odo button until the odometer reads "TEST" and then release.
2) Turn the key to off and repeat step one.
This will reset the entire PCM except the KAM which contains the sensor profiles amongst other things. You can reset it with the familiar procedure:
1) Turn the key to on
2) Depress the brake pedal rapidly 20 times in a row until the oil pressure gauge sweeps to halfway and back again.
I do not know if this is what you are looking for, but please be careful.
Edit: Anyone that has done the reset?
Last edited by Urchin; 02-19-2005 at 11:06 AM. Reason: Hoping to get a response
#121
Registered User
Join Date: Feb 2005
Location: Camp Verde, AZ
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
i had the same problem, dealer is a little more than a hundred miles away, and service guy said to tighten gas cap and call him back if it didnt go away... it didnt. i got it down there, and they took several hours to decipher the code for it, and it came up as a thermostat script in the programming in the car, they updated my software, and magically fixed the problem.
#122
Originally Posted by zoom44
cel upon first starting the car is usually an Evap system test failure. did you get gas yesterday on the way home?
The very next day, when starting the car - it threw another CEL. (And, yes - I had just gotten gas - and thought I was careful to tighten the cap) I plan to take it to the dealer near my office but - what were you going to say about this scenario, out of your experience?
Anomaly
#123
Mad as a wet hen
Join Date: Jul 2003
Location: Big Blue State on the LEFT
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
My car has had two CELs in the past two weeks. First code was P0456: "EVAP system leak detected (very small leak) on 2 EVAP system". The dealer reflashed my car and sent me on my way. CEL reappeared within a week, with this code: "P0442: EVAP system leak detected (small leak) on 2 EVAP system". For that, they replaced my gas filler cap (as Gomez and ClydeJMuggs said they should). So far, so good... two days later, still no CEL.
#125
Registered User
Join Date: Mar 2003
Location: Newport News, Virginia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
The same to me...
They gave me a new cap the second time that I took it in. It worked for a few weeks and then the light came on again. I then took it back and they kept the car for four days, then they told me that they coud not find anything. They did not find a code.
I feel that it will be back on in a few days. I have only had my car for close to four months and its been in the shop once a month since then. That is not right and I'm tired.
I feel that it will be back on in a few days. I have only had my car for close to four months and its been in the shop once a month since then. That is not right and I'm tired.