CEL on - OBD code P0410
#1
CEL on - OBD code P0410
Hi guys - I am a fairly new (5 months) RX-8 guy. I have a 2004 w/ 6 speed manual and 122K miles. It got a warrnaty engine at 95,000 miles and a new radiator at the same time. I recently had the CEL come on and I have my own Can OBD2 tool, so I checked the code. It also has "secondary air injection system" under the code on the machine. I haven't downloaded the reading to my laptop yet. Any ideas?
I also have the intermittent low coolant level light problem that I read about elsewhere in the forums. This is very annoying since it is a red light. I check the coolant regularly now and it doesn't seem to be low, but I overfill it to take the light off (temporarily).
Any help is greatly appreciated!
Bill
I also have the intermittent low coolant level light problem that I read about elsewhere in the forums. This is very annoying since it is a red light. I check the coolant regularly now and it doesn't seem to be low, but I overfill it to take the light off (temporarily).
Any help is greatly appreciated!
Bill
#2
FULLY SEMI AUTOMATIC
iTrader: (9)
not sure about the code, but im sure someone will chime in. the coolant light could be the sensor in the resivior, it happenes. if your coolant is topped off and your not overheating it could be the coolant bottle which i think you have to replace the wholle thing. there is a thread on this if you use the search function.
btw where in pa r u
btw where in pa r u
#3
Thanks
Yeah, I read the thread on the coolant thing. Unfortunate. I am in Paoli. If any of our tech experts does have a suggestion for the code, please let me know. I am not opposed to doing some repairs myself!
Bill
Bill
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM