Brakes making noise :(
 

So my brakes have been fine for a long time. Front pads have probably 95% life and rears are about 30%. So i almost have to replace the rears soon. Before ... When i would brake i would never get any noise. Recently when i brake lightly, i get this clucking noise. I checked my rear pads and theyre not done yet. But yea its like a clucking noise.. Im not to sure how to explain it. What do you guys think it could be ?? :( its annoying the hell out of me.

bumppp

after noon bump ...

Is it only when the vehicle is slowing down to a stop?

Yea !!! If im going high speed and i light brake, no noise. Its when im about to make a full stop at a red or stop sign. WTF is it:( please tell me its nothing serious or expensive .. lol

I'm not sure on what could possibly be the problem, but I have the exact same problem. :(
I think it has something to do with the brakes rubbing something though because if you cruise to a stop, no sound but if you apply the brakes it sounds like it's metal clunking against something right?

Yeaa !! I was thinking the same thing that its definitely rubbing against something. I have never had this problem before, my brakes were fine. I think its coming from the rear, i tried sticking my head out to listen. It bugs the crap out of me :(

I'm having my car looked at soon and I'm going to ask about the noise so if they find out anything I'll tell you but hopefully you find out before then because yeah it gets annoying. :(

I have a bit of life left on my rear pads i wish it was closer to being replaced to i can get it resolved. I live pretty far from mazda id say 50 km or so. I might bite and jsut go get it checked out and drive to mazda.

But ye if you find out ill let you no.. and vice versa lol. thanks dude.

I think your rear pads are done and it's rubbing metal to metal with the rear rotors.
Have them checked just to make sure.

I doubt it cause i have about half an inch of pad left. And its only when i brake lightly to a stop. Thanks though :)

Have you checked the inside pads? Insides usually wear faster and they're tougher to check. Also, just because there's some meat on the pad doesn't mean that it's not worn out. I haven't seen an RX8 pad torn apart, but sometimes metal protrudes into the pad material a bit to aid in keeping the pad held together (if that makes any sense.)

^ Thanks !!! Ill get them replaced asap and see if thats the problem. I just hope i havent damaged my rotors :SHOCKED:

Could be good excuse to buy some slotted rotors if you don't already have them :)

I like the way you think :( but theres lots i want to do before i get new rotors.

So it wont be till end of april till ill have time to get my pads replaced :(.

Any other inputs as to what else could be causing the noise :dunno:

stuck piston caliper that has moved out to keep the pick close enough to the rotor.

I too have seen pads worn in the center with full thickness on the ends.

Unless you pull off the brake you really can't tell the wear on them.

If its a squeal... sand the rotors, but you have a chicken, cluck cluck

stuck piston caliper that has moved out to keep the pick close enough to the rotor.

I too have seen pads worn in the center with full thickness on the ends.

Unless you pull off the brake you really can't tell the wear on them.

If its a squeal... sand the rotors, but you have a chicken, cluck cluck

^ So whats the solution to fix this ?? Replace pads ?? Does this damage the rotors ?? Thanks for the info.

I'd recommend tearing down the brakes without buying anything first. You may just need new pads, or you may need new pads, rotors and a caliper rebuild. (or you may not need anything.) Just pull the caliper off so you can inspect the pads and back of the rotor.

Yea ill do that today thanks.

well the other option is that most pads have a feeler that when you get close to the limit they are designed to squeak so you know to change them... that's where mine are at

^ Yea i know that. But the thing is they dont squeak they "clunk". lol

does it do it all the time or just most of the time, like its part of the tire rotating??

I have that issue up front, passenger side. its not all the time, but only at low speeds and when breaking. Maybe one of the break clips is hitting the rotor... or i got a twig or something up in there lol I'm heading out to pull the pass front.

^ Not all the time. It definitely has something to do with the brakes cause when the wheels are turning no sound. Its when im slowing down, i lightly press the brake and i get a cluck cluck cluck cluck. You can only hear it when music is off and windows are down. Its coming from my rear brakes. It annoys me fuck !! Im about to take the calipers apart. Now what exactly do i look for ?? Also i just remove top and bottom screws right ?? Then put them back as they were ?? I dont wannaa remove them and put them back on wrong and die on the street with no functional brakes lol :suspect: