justjim

I was putting in a BHR upgraded fuel pump for an upcoming track session at Sebring. The fuel pump replacement went well enough but I notice that the Dynamic Stability Control (DSC) light is blinking and the traction control is off. Well thats OK at the track, I turn it off at the track, but how do I reset it. Holding the DSC button in for 10 seconds (the way I turn it off) didn't do anything. The only thing that I did out of the ordinary in the install was I forgot to disconnect the battery before I disconnected the fuel pump. I unlplugged the fuel pump and then disconnected the battery. I tried disconnecting the battery again after the car was started with the new fuel pump but the DSC light is still blinking.

By the way anybody in the Tampa Bay area needs a fuel pump ring wrench I made one that seemed to work pretty well and I would loan it out.

kma5783

iTrader: (7)

Just get in your car, start it and turn the wheel from lock to lock...like all the way left then all the way right and it will reset or in a sense recalibrate the DSC after disconnecting the battery.

justjim

Thanks, that did the trick.