justjim |
08-16-2010 09:34 PM |
Blinking DSC light
I was putting in a BHR upgraded fuel pump for an upcoming track session at Sebring. The fuel pump replacement went well enough but I notice that the Dynamic Stability Control (DSC) light is blinking and the traction control is off. Well thats OK at the track, I turn it off at the track, but how do I reset it. Holding the DSC button in for 10 seconds (the way I turn it off) didn't do anything. The only thing that I did out of the ordinary in the install was I forgot to disconnect the battery before I disconnected the fuel pump. I unlplugged the fuel pump and then disconnected the battery. I tried disconnecting the battery again after the car was started with the new fuel pump but the DSC light is still blinking.:dunno:
By the way anybody in the Tampa Bay area needs a fuel pump ring wrench I made one that seemed to work pretty well and I would loan it out.
|