Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

why is this a problem?

Thread Tools
 
Rate Thread
 
Old Dec 17, 2008 | 04:35 PM
  #1  
LPCOKIE's Avatar
Thread Starter
Registered
 
Joined: Nov 2005
Posts: 159
Likes: 1
From: hot dusty oklahoma city
why is this a problem?

Tip: Do not shift into 1st above 20
mph or clutch failure could occur
out of
RX-8 Quick Tips®
i don't remember seeing that in my 05 manual
Reply
Old Dec 17, 2008 | 04:49 PM
  #2  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,596
Likes: 3,444
From: The Dark Side
it's in there, I'm pretty sure I remember reading it in my '05 manual. That's not nice to the transmission so don't do it.
Reply
Old Dec 17, 2008 | 05:29 PM
  #3  
TheWulf's Avatar
My 8 looks like a Smurf
iTrader: (4)
 
Joined: Sep 2007
Posts: 1,742
Likes: 2
From: Ottawa, ON, Canada
Tip #2: Always rev-match your shifts. Don't rely on the synchros!
Reply
Old Dec 17, 2008 | 05:39 PM
  #4  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
yeha actually my car will not go into 1st till under 10 but i usually put it in at a stop or 5 or lower!!!
Reply
Old Dec 17, 2008 | 06:00 PM
  #5  
mysql's Avatar
Doppelgänger
 
Joined: Feb 2008
Posts: 3,192
Likes: 1
From: Florida
i buffer overflow my 1st gear and shift into it at a negative speed.
Reply
Old Dec 17, 2008 | 06:20 PM
  #6  
Socket7's Avatar
ಠ_ಠ
 
Joined: Aug 2007
Posts: 2,228
Likes: 6
From: Under the Dumbarton Bridge
Originally Posted by mysql
i buffer overflow my 1st gear and shift into it at a negative speed.
Wait, does that mean you go back in time when you shift into second gear? I didn't know that you could get up to 88 mph in first....


I've shifted into first gear at 20 mph. Requires a double clutch to make it work, but it was buttery smooth. In spite of this I can't advise doing it.
Reply
Old Dec 17, 2008 | 06:20 PM
  #7  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
I hate that I have to wait till 30 mph to downshift into first gear. I wish it would do it at 35 instead.


Oh wait I have an AT.
Never mind.
Reply
Old Dec 17, 2008 | 07:33 PM
  #8  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
i shift at the top of first every now and again.

whats wrong with it?

in other news, why is my 1-2 shift getting more difficult?
Reply
Old Dec 17, 2008 | 09:16 PM
  #9  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
Originally Posted by Charles R. Hill
That must be one WEIRD synchronizer.......

its cut backwards
Reply
Old Dec 17, 2008 | 09:29 PM
  #10  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
Originally Posted by Charles R. Hill
But you also wait until 120 until you shift into 3rd. Might as well have a Powerglide.
No I don't. I shift into 3rd at about 90mph. Into 4th is 125.
Reply
Old Dec 18, 2008 | 12:14 PM
  #11  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,596
Likes: 3,444
From: The Dark Side
Originally Posted by Easy_E1
No I don't. I shift into 3rd at about 90mph. Into 4th is 125.
at what speed do you shift into 6th?
Reply
Old Dec 18, 2008 | 12:30 PM
  #12  
Phil's 8's Avatar
FI by Pettit-BHR-Cobb AP
iTrader: (3)
 
Joined: Aug 2004
Posts: 3,026
Likes: 2
From: Sin City, Nevada
Originally Posted by Jedi54
at what speed do you shift into 6th?
Originally Posted by Easy_E1
No I don't. I shift into 3rd at about 90mph. Into 4th is 125.
I thought you had one of those cars that would not go above 125? I hear that there are several out there.
Reply
Old Dec 18, 2008 | 01:58 PM
  #13  
mazdaverx7's Avatar
RX-Heaven
iTrader: (6)
 
Joined: Sep 2008
Posts: 2,287
Likes: 256
From: Vermilion Ohio
shifting into 3rd at 90mph??? i would say not too much more than 70mph in 3rd... i'm shifting out of 2nd and into 3rd around 63mph...
Reply
Old Dec 18, 2008 | 02:03 PM
  #14  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,596
Likes: 3,444
From: The Dark Side
they've got A/T's.
Reply
Old Dec 18, 2008 | 11:18 PM
  #15  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
i believe the correct speed to shift from 3rd into 4th is around 82mph.
Reply
Old Dec 19, 2008 | 12:14 AM
  #16  
83FB7's Avatar
Registered User
 
Joined: Sep 2006
Posts: 8
Likes: 0
Originally Posted by kersh4w
i shift at the top of first every now and again.

whats wrong with it?

in other news, why is my 1-2 shift getting more difficult?
The OP means downshifting into 1st from 2nd, not upshifting from 1st to 2nd.
Reply
Old Dec 19, 2008 | 02:32 AM
  #17  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
ah, well my heel-toeing needs improvement before i can do that.
Reply
Old Dec 19, 2008 | 08:47 AM
  #18  
mazdaverx7's Avatar
RX-Heaven
iTrader: (6)
 
Joined: Sep 2008
Posts: 2,287
Likes: 256
From: Vermilion Ohio
Thumbs up

Originally Posted by Jedi54
they've got A/T's.
that clears things up
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
Mar 14, 2021 03:53 PM
Zube6115
Series I Trouble Shooting
8
Sep 30, 2015 12:57 PM
tommy26Germany
Series I Trouble Shooting
11
Sep 29, 2015 10:33 AM
kody59
RX-8 Discussion
3
Sep 28, 2015 03:43 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:23 AM.