Where should I start for $2k
#26
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Razz,
the interceptor looks cool, it kinda reminds me of a car a friend of mine had about 8 yrs. ago.
It was 86 Grand National. He worked for a co. that made eproms which were programable chips for computers. They also made them for some GM cars.
It just so happened his GN used this same chip. So with the chips, and some software off the internet, it may have been purchased I can't remember. He was able to make his own powerchips. He messed with every thing from the turbo, and fuel delivery to shift points, and converter lockup.
For a stock car, what he could achieve with that software, and a chip was very impressive.
the interceptor looks cool, it kinda reminds me of a car a friend of mine had about 8 yrs. ago.
It was 86 Grand National. He worked for a co. that made eproms which were programable chips for computers. They also made them for some GM cars.
It just so happened his GN used this same chip. So with the chips, and some software off the internet, it may have been purchased I can't remember. He was able to make his own powerchips. He messed with every thing from the turbo, and fuel delivery to shift points, and converter lockup.
For a stock car, what he could achieve with that software, and a chip was very impressive.
#28
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I'd have to suggest a mod I'm considering. Look around for Charles R. Hill's posts on how to install a ZEX nitrous system. It gives you the big gains of a turbo (temporarily, of course) for about 1/8th of the cost, it's there when you want it but not when you don't, it's relatively easy to install, and none of the other mods people have suggested will get you the same kind of performance boost.
A full kit with some accessories will run you about $700.
A full kit with some accessories will run you about $700.
Besides his whole point to this is to tinker, and learn about the rotary. It might be to easy an answer.
But thanks.
#29
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
how about you take the time to read around a bit. i would start with the stickys... lot of answers there.. if you had read them you post would have be a ? about one item...
i read here for 6 months before i got the car.. do your research... it is here... we are not here to be your bitch..
if you really want to know about my sig.. you can pm me..
you have 6 posts all on this thread, and are doing homework for a friend. i have wasted enough time here..
another link....
https://www.rx8club.com/showthread.p...ight=flywheels
i found that using the albino link from above... dont be lazy..
beers
i read here for 6 months before i got the car.. do your research... it is here... we are not here to be your bitch..
if you really want to know about my sig.. you can pm me..
you have 6 posts all on this thread, and are doing homework for a friend. i have wasted enough time here..
another link....
https://www.rx8club.com/showthread.p...ight=flywheels
i found that using the albino link from above... dont be lazy..
beers
So I ask the simple question just to get a few opinions, and this turns into me being lazy. Looking at this forum till 2am last night isn't exactly what I'd call lazy.
I've done research which I always do on any forum, on any sublject before I even decide if I'm going to join the forum, so I can post a question.
I've looked at this forum for I don't know how long, and just decided last night that it's time to get a few opinions. So I joined, asked the question, all so I could be accused of making YOU PEOPLE MY BITCH, and then be called LAZY!!!
F#@K YOU!!!
I'm the guy who's waisted his time.
I'll be sure to let my friend know, he shouldn't have bought a car that is so delicate, that the people who think so highly of them are to afraid to give any good opinions on what mods to do first.
Save for a good few.
#31
DGAF
iTrader: (1)
Join Date: Jan 2006
Location: Austin, TX
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
Good lord people, go easy on the guy. I know we've had a lot of trolls here lately but this guy doesn't seem to be looking for trouble.
Phantom Menace: I'm thinking about it. We'll see how much cash I have left after Mid-Ohio this summer.
Phantom Menace: I'm thinking about it. We'll see how much cash I have left after Mid-Ohio this summer.
#34
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
#35
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
#37
Senior Member
iTrader: (1)
Most bolt on stuff wont teach you a lot about the rotary or get any major power gains... the only thing I can specifically think of is that exhaust back pressure isnt an issue with the rotary. To truly learn about the engine, there's a lot of reading or doing a rebuild (or somethign similar)... but reading might be a better start. Best thing to do is to find what each mod will do on average and then fine tune your decision by personal preference... for most bolt ons such as exhaust and intake that's about all you can do. Though, with a general idea of how much hp you want, a more specific list is reasonable to ask for. Try making a small list based off what you read, then get opinions on waht to keep the same or change. People are glad to help, but they always like to see effort too. My $0.02 for now. good luck!
Last edited by 8 Maniac; 05-14-2007 at 11:07 PM.
#40
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
At the moment, I'm trying to figure out who's reading it more me or you.
I did ask the question, kinda gives me a reason for being here.
Didn't you say, "you were done here."
BYE!!
#41
Registered
Join Date: Mar 2007
Location: Warwick, RI
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Whew, for a minute there I thought I was talking to my mother.
Seriously guys, my friend would be happy with a 30 to 50 hp gain.
so lets stop babysitting and give me some serious input.
Im not trying to be smart but were grown adults.
I just want some simple input so I guide him in the right direction.
Im off work with some medical issues right now and can't do much.
He mentioned the idea, and I told him I would research it.
Now Im asking this here because I know this is a great forum with great people
who like to help the fellow rotary owner.
So how about it.
Rick
P.S. The car was bought with this whole intention.
He likes to do things in steps with good records of results.
Seriously guys, my friend would be happy with a 30 to 50 hp gain.
so lets stop babysitting and give me some serious input.
Im not trying to be smart but were grown adults.
I just want some simple input so I guide him in the right direction.
Im off work with some medical issues right now and can't do much.
He mentioned the idea, and I told him I would research it.
Now Im asking this here because I know this is a great forum with great people
who like to help the fellow rotary owner.
So how about it.
Rick
P.S. The car was bought with this whole intention.
He likes to do things in steps with good records of results.
You mentioned you are interested in doing intake/exhaust mods. There isn't much improvement to be found in chainging these components. Search around and you'll see that your looking at nominal, negligible or non-existant gains. The stock components are very well sorted.
I am closing in on my 3rd month of RX8 ownership. I have a modest budget for mods. I'll list the mod and the reason(s), I'm doing them. Hopefully it will prove helpful. You'll see I'm not spending much on power mods as it takes a huge investment to get anywhere significant. Your better off investing in the suspension as you can make some worthwhile improvements there without breaking the bank. I also bought the lotek gauge pod and prosport oil temp, water temp and oil pressure gauges. The $250.00 investment is worthwhile IMO as you can keep on top of your cars health, especially at hot summer track days.
Motor/Drivetrain
1) Agency Power Underdrive Pulley: The main reason I bought this is that it helps with water pump cavitation improving cooling at high rpms and hot track days. I have yet to install, its sitting in a box next to me right now. It may also net some negligible performance gains, but I'm not anticipating much.
$100.00
2) Racing Beat Street Flash: I'm on the fence on this one as I'm awaiting the release of the Access Port. That said, the reason I was planning on the flash is the lower temperature on/off of the cooling fans along with some modest performance increases (again pretty negligible). The mazport cooling mod costs about half of the racing beat flash and improves cooling in much the same way. The flash only costs $150.00 more and offers some slight increases in performance. To me it seems worth it. Again, I'm not expect much of a noticeable difference.
$350.00 with shipping
Both of the above made sense to me because they provide a sort of double benefit: Improving cooling and modest performance gains.
Eventually, I'd like to a lightweight flywheel. The gains are probably the best for the money, but the install is difficult or costly if done by a professional.
$800.00-$1000.00 including install
Suspension:
Dampers: I'm thinking either koni's or Tokico D-specs. Either will help with the underdamped rear suspension along with generally improving the already exceptional handling of the car.
$500.00-$600.00
Springs: Still haven't picked a set, but there are some good deals to be had on either tein h-tech or s-tech springs. I don't want to go too stiff as the 8 is my daily driver and the roads in NE are terrible.
$150.00 - $200.00
I've settled on not doing threaded body (ride height adjustable) coilovers as the tein basics (the only one's in my price range) don't offer adjustable damping. It would be nice to get corner weighted perfectly though with them.
Sway Bars:
Haven't really settled on anything yet. Thinking racing beat front and rear with endlinks:
$500.00
Wheels and Tires:
I'd love to do a set of 9.5" wide Enkei RPF1s, but that will cost around $1300.00. Its not in the budget right now.
Tires:
Falken Azenis RT-615 or Kumho Ecsta MX. I have to decide how little tread life I'm willing to live with. With stock rims, I'm planning on doing 235/40/18, as its a good trade off between a slight increase in width without compromising sidewall stiffness (like some have said 245s do).
$700.00
Without the Enkei wheels, the total is under 3k for all of the above. This became a much longer post than I initially intended, but I was having fun thinking about my car/mods.
#42
2005 Black RX-8 GT 6M
Join Date: Jul 2006
Location: San Jose Area
Posts: 6,350
Likes: 0
Received 0 Likes
on
0 Posts
There seams to be some confusion. I saw that thread I know about all the fly wheels, the pipes, pulleys and everything freakin else you can do to this car.
So I ask the simple question just to get a few opinions, and this turns into me being lazy. Looking at this forum till 2am last night isn't exactly what I'd call lazy.
I've done research which I always do on any forum, on any sublject before I even decide if I'm going to join the forum, so I can post a question.
I've looked at this forum for I don't know how long, and just decided last night that it's time to get a few opinions. So I joined, asked the question, all so I could be accused of making YOU PEOPLE MY BITCH, and then be called LAZY!!!
F#@K YOU!!!
I'm the guy who's waisted his time.
I'll be sure to let my friend know, he shouldn't have bought a car that is so delicate, that the people who think so highly of them are to afraid to give any good opinions on what mods to do first.
Save for a good few.
So I ask the simple question just to get a few opinions, and this turns into me being lazy. Looking at this forum till 2am last night isn't exactly what I'd call lazy.
I've done research which I always do on any forum, on any sublject before I even decide if I'm going to join the forum, so I can post a question.
I've looked at this forum for I don't know how long, and just decided last night that it's time to get a few opinions. So I joined, asked the question, all so I could be accused of making YOU PEOPLE MY BITCH, and then be called LAZY!!!
F#@K YOU!!!
I'm the guy who's waisted his time.
I'll be sure to let my friend know, he shouldn't have bought a car that is so delicate, that the people who think so highly of them are to afraid to give any good opinions on what mods to do first.
Save for a good few.
#43
Power!!
*walks into the room...looks around, gives Swoope a node*
Friend If you've done your research like you say you have why did you start a new thread to ask this question? There are about 10 others just like it. As well you could have simply posted your individual questions in the threads that were relevant. If you're not up on Forum ettiquette its not very polite to start threads like this when there are plenty of them already out there.
Friend If you've done your research like you say you have why did you start a new thread to ask this question? There are about 10 others just like it. As well you could have simply posted your individual questions in the threads that were relevant. If you're not up on Forum ettiquette its not very polite to start threads like this when there are plenty of them already out there.
Last edited by shaunv74; 05-15-2007 at 12:10 AM.
#44
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
#45
Nope
iTrader: (9)
There seams to be some confusion. I saw that thread I know about all the fly wheels, the pipes, pulleys and everything freakin else you can do to this car.
So I ask the simple question just to get a few opinions, and this turns into me being lazy. Looking at this forum till 2am last night isn't exactly what I'd call lazy.
I've done research which I always do on any forum, on any sublject before I even decide if I'm going to join the forum, so I can post a question.
I've looked at this forum for I don't know how long, and just decided last night that it's time to get a few opinions. So I joined, asked the question, all so I could be accused of making YOU PEOPLE MY BITCH, and then be called LAZY!!!
F#@K YOU!!!
I'm the guy who's waisted his time.
I'll be sure to let my friend know, he shouldn't have bought a car that is so delicate, that the people who think so highly of them are to afraid to give any good opinions on what mods to do first.
Save for a good few.
So I ask the simple question just to get a few opinions, and this turns into me being lazy. Looking at this forum till 2am last night isn't exactly what I'd call lazy.
I've done research which I always do on any forum, on any sublject before I even decide if I'm going to join the forum, so I can post a question.
I've looked at this forum for I don't know how long, and just decided last night that it's time to get a few opinions. So I joined, asked the question, all so I could be accused of making YOU PEOPLE MY BITCH, and then be called LAZY!!!
F#@K YOU!!!
I'm the guy who's waisted his time.
I'll be sure to let my friend know, he shouldn't have bought a car that is so delicate, that the people who think so highly of them are to afraid to give any good opinions on what mods to do first.
Save for a good few.
#47
Cars and Guitars
Thread Starter
Join Date: May 2007
Location: Harrisburg, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Do me a favor read the whole thread start to finish, not just the last post where I let my frustation get the better of me.
Thanks
#49
Registered
Join Date: Mar 2007
Location: Warwick, RI
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
My car was slow as death when I got it. After all the warranty work, it was terrific. It was nice to have a dyno pull to confirm my feeling that it was very very healthy for a stock car.
I am super busy these days as I'm moving my shop and getting some new machinery (I'm in the printing business). Hopefully I'll get around to the gauges and pulley in a week or two. I'm planning on doing the dampers, springs and tires in a couple of months. I'm waiting for news on the Access Port before I commit to the RB flash. I probably won't get to the flywheel until the fall.
I'll be dynoing the car again on the 14th of july. It will most likely be in the 80s-90s though so comparing to the recent pulls done at 75 deg will be tough.
I'll post with the results at that point. Its likely only the pulley will be installed.