Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Transmission rebuild

Thread Tools
 
Rate Thread
 
Old Sep 24, 2009 | 03:12 PM
  #26  
Rx8_rotory_Noobie's Avatar
Thread Starter
RotorHeads Unite!
 
Joined: Nov 2008
Posts: 225
Likes: 0
From: Kansas
So, listen to this ****. I go to the dealership and had them install a BRAND NEW 09 tranny, had them install the stage 3 Exedy and prolite flywheel. I havent really driven it hard since the install and havent raced it at all.... NOW ALL THE SUDDEN when im trying to run it hard thru all the gears it ***** up. When i go to shift into 4th gear it grinds for a half second before it slides in! WTFFFF im so mad. The worst part is that they are trying to tell me the warranty is void because of my nos, they failed to tell me this BEFORE they installed the tranny....so theres nothing i can do, im stuck with a **** tranny because i didnt take my nos kit off before i had them install the tranny.gay.......
Reply
Old Sep 26, 2009 | 06:08 AM
  #27  
outinnowhere3193's Avatar
outinnowhere3193
iTrader: (2)
 
Joined: Oct 2008
Posts: 165
Likes: 1
From: Hymera, Indiana
All I got to say....is to drive it...and go with it....it is bull **** that they did that too you..and forth is that all the time or only when in higher rpm's???

You could try some other fluid like the redline everyone talks about.

I hate to say it..but when I needed a tranny everyone told me to go with the 09 that is was much better and worth it...and I went with my rx7 tranny.. I've since then ran it rather hard....shift the gears hard..and third does have a small grind when shifting in..but it's a tranny from the junk yard that i bought for 225!!!!! I didn't expect it to be perfect. I got the short throw for 40 bucks. Parts are so much cheaper for the rx7 tranny..it was totally worth it to me.

https://www.rx8club.com/series-i-do-yourself-forum-73/diy-rx7-tranny-rx8-182557/
Reply
Old Sep 27, 2009 | 11:10 PM
  #28  
Rx8_rotory_Noobie's Avatar
Thread Starter
RotorHeads Unite!
 
Joined: Nov 2008
Posts: 225
Likes: 0
From: Kansas
Yah only in higher rpms... =/ And it is a 09 tranny, maybe a bug that will be recalled...thing is...will the recall work for me since its on a 04?
Reply
Old Sep 27, 2009 | 11:32 PM
  #29  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

You bought a new 09' tranny, clutch, and Fly wheel for an 04' 8?

Sorry man gotta call
Reply
Old Sep 28, 2009 | 06:11 AM
  #30  
outinnowhere3193's Avatar
outinnowhere3193
iTrader: (2)
 
Joined: Oct 2008
Posts: 165
Likes: 1
From: Hymera, Indiana
yeah... I think he did...the thing that goes threw my head...is how much did that cost him???


See everyone told me to go with a 09 and I didn't and now that I got it back together and everything is great I'm glad I didn't. My install with new clutch, flywheel, pressure plate, drive shaft and used tranny was about 1400...still cheaper then the 09 tranny.
Reply
Old Sep 28, 2009 | 12:37 PM
  #31  
Rx8_rotory_Noobie's Avatar
Thread Starter
RotorHeads Unite!
 
Joined: Nov 2008
Posts: 225
Likes: 0
From: Kansas
Call bs all you want, i can provide pictures. And if you look down about 3cm you will see that i got a 09 tranny with ExedyS2 clutch and prolite flywheel. Just because you dont have it doesnt mean no one does.

Last edited by Rx8_rotory_Noobie; Sep 28, 2009 at 12:37 PM. Reason: cursewords
Reply
Old Sep 28, 2009 | 01:35 PM
  #32  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 36
From: Planet Earth
well, 09+ Tranny works 100% with 04-08 cars. it bolts right up without any modification.

Same thing for FW and others.

but ... what kind of warranty are you asking for anyway? as far as I know you wont get any warranty for that kind of "swap" ...
Reply
Old Sep 29, 2009 | 05:52 AM
  #33  
outinnowhere3193's Avatar
outinnowhere3193
iTrader: (2)
 
Joined: Oct 2008
Posts: 165
Likes: 1
From: Hymera, Indiana
Originally Posted by Rx8_rotory_Noobie
Call bs all you want, i can provide pictures. And if you look down about 3cm you will see that i got a 09 tranny with ExedyS2 clutch and prolite flywheel. Just because you dont have it doesnt mean no one does.
If you think I'm calling bs...I'm not.. I was just saying everyone says it's better and I didn't believe it....I'm just saying I'm glad I didn't go with the 09 tranny.

But really do wonder what that cost at the dealership...tranny and labor had to be like 4000
Reply
Old Sep 29, 2009 | 11:49 AM
  #34  
Rx8_rotory_Noobie's Avatar
Thread Starter
RotorHeads Unite!
 
Joined: Nov 2008
Posts: 225
Likes: 0
From: Kansas
Not you outinnowhere, i was refering to the BS flag that 9krpmrx8 put up.
Reply
Old Aug 10, 2012 | 07:09 PM
  #35  
fidelity101's Avatar
Registered
 
Joined: Dec 2009
Posts: 23
Likes: 0
From: DET/SE-MI
Originally Posted by TeamRX8

there is a stand-alone Mazda service manual for the RX-8 transmission
Okay anyone have a downloadable copy of this? I just picked up an 04 6 speed that needs syncros and unlike the FC there is no access panel to look at stuff.

I found the rx8 service manual but doesnt go into overhaul of the trans, just tells you specs and clutch repair.

pretty sad
Reply
Old Oct 17, 2012 | 05:16 AM
  #36  
dznutzuk's Avatar
Uncontrollable drifter
 
Joined: Jun 2005
Posts: 476
Likes: 1
From: Hellas
I've also been looking for some kind of manual, I accidently removed the torx screw from the underside and something fell into out and I can't find it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
Mar 14, 2021 03:53 PM
airlive
New Member Forum
5
Jun 28, 2020 07:46 AM
JimmyBlack
Series I Major Horsepower Upgrades
273
Feb 10, 2020 10:23 PM
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
Von Walker
New Member Forum
1
Sep 13, 2015 03:54 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 08:05 AM.