Squeaky Alternator Pulley
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: Palmdale, CA
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Squeaky Alternator Pulley
Hey Guys,
My car has been making an annoying chirp/squeak at idle, and I deduced that it's coming from the alternator pulley. If I spray a little WD-40 right in the middle of the bearing the sound goes away, but comes back after a few minutes. Is there a better lube I can put on there to silence it, or do you think my bearing is going bad and should just replace it?
Thanks!
My car has been making an annoying chirp/squeak at idle, and I deduced that it's coming from the alternator pulley. If I spray a little WD-40 right in the middle of the bearing the sound goes away, but comes back after a few minutes. Is there a better lube I can put on there to silence it, or do you think my bearing is going bad and should just replace it?
Thanks!
#4
Registered
Thread Starter
Join Date: Jan 2005
Location: Palmdale, CA
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
I suppose I'll look into replacing it. I'm not sure where I would get that part though...
In the meantime I tried rubbing a little white lithium grease in the center bearing of the pulley and that seems to be doing well. It's been a day now and the noise is still gone. I'll be keeping an eye on it to see how long that lasts.
In the meantime I tried rubbing a little white lithium grease in the center bearing of the pulley and that seems to be doing well. It's been a day now and the noise is still gone. I'll be keeping an eye on it to see how long that lasts.
#5
2005 White GT
iTrader: (1)
Join Date: Feb 2006
Location: Spokane Valley, Washington
Posts: 1,210
Likes: 0
Received 2 Likes
on
2 Posts
Once you get the alternator apart, any bearing supply company should be able to help you. here's a start: https://www.motionindustries.com/mot...p/mi/index.jsp
Last edited by EDZRIDE; 03-09-2009 at 02:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM