Speedsource tranny
#1
Registered
Thread Starter
Join Date: May 2007
Location: Montreal
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
Speedsource tranny
I was watching this you tube video, and was wondering what kind of transmission this was.
Any ideas?
http://youtube.com/watch?v=_jqEyAIRR1c
Any ideas?
http://youtube.com/watch?v=_jqEyAIRR1c
#10
Registered
iTrader: (1)
Join Date: May 2006
Location: Carolina Beach, NC
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
Daytona Prototype is the type of gearbox used. The DP cars have a special gearbox and SpeedSource just happens to use it. I can talk to Sylvain tomorrow if you would like...and they run in the GT class...wow.
BTW here are the specs straight from SpeedSource:
2008 Mazda RX-8 specs.
Engine:
20B Three rotor rotary engine (1,950cc)
Max Power 425HP @ 8500RPM
Max Torque 285 ft-lbs. @ 7600
Max RPM 8800
Dry Sump Lubrication
Bosch 4.3 ECU
Gearbox
Emco Daytona Prototype
Six forward gears and one reverse
Ring and Pinion 10/35
Bodywork
All carbon fiber
73.5 inch width
174 inch length
Suspension
Dymanic Suspension DSSV shocks
Front and Rear adjustable anti-roll bars
18x11 Racing Hart wheel front with 285/645-18 Pirelli Racing tire
18x11.5 Racing Hart wheel rear with 305/660-18 Pirelli Racing tire
Brakes
Dual master cylinders with balance bar
Four piston Alcon front and rear calipers
Cast iron vented Alcon rotors front and rear
Pagid racing brake pads
BTW here are the specs straight from SpeedSource:
2008 Mazda RX-8 specs.
Engine:
20B Three rotor rotary engine (1,950cc)
Max Power 425HP @ 8500RPM
Max Torque 285 ft-lbs. @ 7600
Max RPM 8800
Dry Sump Lubrication
Bosch 4.3 ECU
Gearbox
Emco Daytona Prototype
Six forward gears and one reverse
Ring and Pinion 10/35
Bodywork
All carbon fiber
73.5 inch width
174 inch length
Suspension
Dymanic Suspension DSSV shocks
Front and Rear adjustable anti-roll bars
18x11 Racing Hart wheel front with 285/645-18 Pirelli Racing tire
18x11.5 Racing Hart wheel rear with 305/660-18 Pirelli Racing tire
Brakes
Dual master cylinders with balance bar
Four piston Alcon front and rear calipers
Cast iron vented Alcon rotors front and rear
Pagid racing brake pads
Last edited by I8U; 05-19-2008 at 09:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post