Sohn Adapter related question
#1
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Sohn Adapter related question
what size hose to use on that fitting on the adapter??
i have the installation instructions but doesnt say what size hose to use.
any info would be much appreciated as i would like to do this mod asap.
parts been laying around for about a week already and ive searched forum and googled no info on what size to use , also ive seen people use custom fittings but i really want to stick with not changing anything and using what i have.
i have the installation instructions but doesnt say what size hose to use.
any info would be much appreciated as i would like to do this mod asap.
parts been laying around for about a week already and ive searched forum and googled no info on what size to use , also ive seen people use custom fittings but i really want to stick with not changing anything and using what i have.
#2
Registered
Join Date: Apr 2012
Location: Altamone Springs, FL.
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Take the adapter to Lowes/Home Depot and find a hose that is rated for use with oil that fits the barb fitting on the adapter. Its probably going to be 5/16 or 3/8
#3
The Heavy Metal Scientist
iTrader: (7)
^beat me too it lol
You can always do what I did. I brought the adapter with me to home depot, found a black hose that fit snug on the adapter that was acceptable for use with oils, and would stay in place with a small hose clamp then I found a corresponding fitting in plumbing section that fit the hose for the reservoir. Simple and easy.
You can always do what I did. I brought the adapter with me to home depot, found a black hose that fit snug on the adapter that was acceptable for use with oils, and would stay in place with a small hose clamp then I found a corresponding fitting in plumbing section that fit the hose for the reservoir. Simple and easy.
Last edited by redline86; 08-16-2012 at 10:00 PM.
#4
Extraordinary Engineering
I purchased 3/8" OD - 1/4" ID PTFE tubing from US plastics. http://www.usplastic.com/catalog/ite...3540&catid=840
Make sure you use tubing made for petroleum products and capable of withstanding engine bay temperatures.
Make sure you use tubing made for petroleum products and capable of withstanding engine bay temperatures.
Last edited by DarkBrew; 08-17-2012 at 06:37 AM.
#5
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
thank you guys so much so , btw i did happen to go to homedepot and they did not have any hoses for oil/ petroleum use.
also will i be needing hose clamps or is this something where i just need to shove the hose on the fitting and it wont leak?
oh and about how long do i need the hose to be i want to mount the reservoir where the washer fluid bottle is.
also will i be needing hose clamps or is this something where i just need to shove the hose on the fitting and it wont leak?
oh and about how long do i need the hose to be i want to mount the reservoir where the washer fluid bottle is.
Last edited by coolx7; 08-16-2012 at 10:53 PM.
#7
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
does it need to be transparent and heat resistant , im browsing online at lowes / home depot website , amazon and google nothing i see says heat resistant except the black rubber hoses that arent transparent
#8
The Heavy Metal Scientist
iTrader: (7)
It needs to be able to withstand engine bay temps, the hose I used is black, is thick, and is heat resistant and is ok to use with motor oils. Doesn't need to be see through, the black hose IMO blends in better in the engine bay that already has black hoses everywhere.
Just make sure it can handle the heat, oil, and wont easily be cut or have holes rubbed into it via vibrations from the engine.
Just make sure it can handle the heat, oil, and wont easily be cut or have holes rubbed into it via vibrations from the engine.
#13
The Heavy Metal Scientist
iTrader: (7)
I use Idemitsu rotary premix, I would say read the premix thread but it is pages upon pages of useless crap and chatter. People say stay away from TCW3 or the marine stuff if you have a cat. still installed. I've heard good things about Royal Purples 2 stroke. I buy my Idemitsu from mazdatrix.com and a case last me about a year plus I still premix even though I have a sohn adapter. I doubt you could go wrong with a quality brand like Amsoil, Redline, or something equivalent.
#14
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
thanks but i've searched around and some say premixing isnt necessary if just daily street driving. so ill be just using the oil with sohn adapter is there certain weights or specific two cycle oil that i should be using?
#17
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Lucas Oil Products - Semi-Synthetic 2-Cycle Land and Sea Oil
Lucas Oil Products 10557 - Semi-Synthetic 2-Cycle Land and Sea Oil | O'Reilly Auto Parts
can this be used??
and as for the premix i see that on forums theres alot of different opinions on what to use , so how many ounces per full tank of gas? and with premix i can just add the above oil to my fuel right?
Lucas Oil Products 10557 - Semi-Synthetic 2-Cycle Land and Sea Oil | O'Reilly Auto Parts
can this be used??
and as for the premix i see that on forums theres alot of different opinions on what to use , so how many ounces per full tank of gas? and with premix i can just add the above oil to my fuel right?
#20
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
i have used google but i dont see any local stores around me that sell redline , amsoil and the other ones mentioned above really dont want to purchase online as my cars just sitting there waiting for the oil so i can start it up. and i dont want to put in something that will end up ruining the car. im located in 91755 southern california.
Last edited by coolx7; 08-23-2012 at 03:52 PM.
#22
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
i dont understand how this is spoon feeding?
ive searched on line , gone to walmart , home depot , autozone , oreilly auto , napa in my area and havent found any suitable 2 cycle oil . and i did read this thread
https://www.rx8club.com/tech-garage-...premix-179072/
and i did see that ASH8 along with a few others said not to use oils TCW3 certified
but thats all that was available in the stores.
one more thing THERE WAS NO brand amsoil in any of those stores ,or redline 2 cycle oil besides masterpro and lucas which were TCW3 certified and at walmart was some uknown brand called supertech with no certs or ratings at all.
ive searched on line , gone to walmart , home depot , autozone , oreilly auto , napa in my area and havent found any suitable 2 cycle oil . and i did read this thread
https://www.rx8club.com/tech-garage-...premix-179072/
and i did see that ASH8 along with a few others said not to use oils TCW3 certified
but thats all that was available in the stores.
one more thing THERE WAS NO brand amsoil in any of those stores ,or redline 2 cycle oil besides masterpro and lucas which were TCW3 certified and at walmart was some uknown brand called supertech with no certs or ratings at all.
#23
The Heavy Metal Scientist
iTrader: (7)
It would be ok to use a good brand TCW3 until a case of a premix of your choice arrives. I just wouldn't use it for an extended period of time. Also, you could always just use some clean oil that you would normally use for your engine. You where injecting dirty motor oil before, I'm sure clean motor oil would be ok until a case of Idemitsu arrives.
#24
Registered
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: socal
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the kind reply , ill finish up the lucas 2 cycle that i purchased yesterday then get some idemitsu as you recommend since i cant find anything not tcw3 certified locally.
for the sohn adapter reservoir can i have just pure idemitsu premix oil in there when i get that fluid?
for the sohn adapter reservoir can i have just pure idemitsu premix oil in there when i get that fluid?
Last edited by coolx7; 08-24-2012 at 03:44 PM.
#25
Metatron
iTrader: (1)
i cant find anything not tcw3 certified locally.
Yes, stay away from TCW, I'd run without premix before I'd put that crap in the tank.
Look for an ISO-EGD or JasoFB rated oil, or do without, boat oil is for boats.
Yes, stay away from TCW, I'd run without premix before I'd put that crap in the tank.
Look for an ISO-EGD or JasoFB rated oil, or do without, boat oil is for boats.