Relocating plate for RB Air Ram Duct

Apr 6, 2009 | 06:51 AM

heyarnold69

Thread Starter

Rotary wanabee

iTrader: (1)

Joined: Jul 2007

Posts: 1,978

Likes: 0

From: Long Island, NY

Relocating plate for RB Air Ram Duct

Cheapest way to move plate ever!

1. Take off current plate and holder
2. Cut off spacers (Look like tabs) from the bottom of the plate
3. Place holder upside down and mount in original holes.

The new location is a little over an inch upwards and now doesn't interfere with the RB intake duct.

Attached Thumbnails

Relocating plate for RB Air Ram Duct-plate.jpg

Last edited by heyarnold69; Apr 6, 2009 at 06:54 AM.

Apr 6, 2009 | 08:21 AM

Greenblurr93

Sotally Tober

iTrader: (1)

Joined: Jan 2008

Posts: 957

Likes: 1

From: The Sun

I just took the plate off and kept it off...

Apr 6, 2009 | 08:23 AM

wcs

no agenda

iTrader: (2)

Joined: Feb 2005

Posts: 5,210

Likes: 67

From: Ontario

Neat idea.
I'm going to try that this weekend when I get home

Apr 9, 2009 | 07:27 PM

heyarnold69

Thread Starter

Rotary wanabee

iTrader: (1)

Joined: Jul 2007

Posts: 1,978

Likes: 0

From: Long Island, NY

No money: the ultimate motivator

Apr 14, 2009 | 09:39 PM

PSTNLSS

The Former PSNTLSS

iTrader: (3)

Joined: Jun 2007

Posts: 1,094

Likes: 0

From: South Plainfield, NJ/ Center Valley, PA

Nice write up Arnold

I'd recommend relocating the plate in general.

My OEM plateholder scratched up my bumper horribly. Much touch up paint

http://img6.imageshack.us/img6/5695/img00162g.jpg