Power steering as and independant system?
#1
Registered
Thread Starter
Join Date: Feb 2008
Location: Rochester NY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Power steering as and independant system?
I have a project car in my shop that no longer uses the stock ECU to control the motor. Is it possible to run the power steering without the engine ecu? I am under the impression that the PS control unit being on the CAN bus would not work if it looses communication with the ECU. Any help would be greatly appreciated.
Thanks
Thanks
#2
Registered
Thread Starter
Join Date: Feb 2008
Location: Rochester NY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Bit of follow up, testing on my way home. I drive a RX8 on the street also.. Anyway the power steering on the RX8 will continue to work with the engine stopped and the car not moving. So we can conclude that the system is not dependent on a RPM or speed signal via the CAN bus. I'll do some more testing tomorrow and isolate the PS harness from the rest of the crap.
#3
An RX ate my baby
Join Date: Aug 2006
Location: A swirling eddy of electronic mayhem
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Keep us updated. I'd like to use an RX8 rack in my next project car so I don't have to use a power steering pump. I have a '55 GMC 302 six cylinder hot rod motor I want to build a body for.
Thread
Thread Starter
Forum
Replies
Last Post
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM