help with oil cooler lines
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: andover, ma
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
help with oil cooler lines
Hey guys,
Any advice on swapping out the oil cooler lines on an MT? It looks, well, challenging, to get to the engine side of the lines. Dealer wanted $2400 to replace all of the lines, so I'm giving it a go myself, but I don't think replacing all of them is necessary. Only the lower driver side cooler line burst. I can see their point about replacing all the way to the engine now on that side. The passenger side looks fine to me.
Thanks,
John
Any advice on swapping out the oil cooler lines on an MT? It looks, well, challenging, to get to the engine side of the lines. Dealer wanted $2400 to replace all of the lines, so I'm giving it a go myself, but I don't think replacing all of them is necessary. Only the lower driver side cooler line burst. I can see their point about replacing all the way to the engine now on that side. The passenger side looks fine to me.
Thanks,
John
#2
Administrator
iTrader: (7)
I'm pretty sure the workshop manual is floating around here somewhere. I saw the thread bumped recently so do a quick search.
that should help you out quite a bit.
that should help you out quite a bit.
Thread
Thread Starter
Forum
Replies
Last Post
gwailo
New Member Forum
30
06-07-2020 12:21 PM
Touge
Canada Forum
3
09-10-2015 08:07 AM
Touge
Canada Forum
0
09-01-2015 10:47 PM