Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

HELP! DSC and Traction Ctrl. Lights On! Again!

Thread Tools
 
Rate Thread
 
Old Jan 15, 2009 | 05:32 PM
  #1  
d_mashuda's Avatar
Thread Starter
Registered
 
Joined: Jun 2008
Posts: 39
Likes: 0
From: Princeton, Wi
HELP! DSC and Traction Ctrl. Lights On! Again!

Hey I was wondering if anyone else had this problem. I Had the same problem last year. Ok...Well first off last summer i put subs in the car and hit the wire harness somehow with the drill bit going through the firewall by the steering column. Thats the first mistake...Ik. Ok so i pulled out half of the harness and repaired the 6? wires with factory heatshrink crimp splices, worked and looked like new. After i did that, traction controle light, dsc light were on constant and cruise controle didnt work. Couldn't figure it out so took it to the local mazda dealer and they traced it to the wheel speed controler mounted where all the brake lines all come to a block on the firewall in the engine bay, driver side. So replaced that and fixed everything. Now have the car parked in a non-heated garage for winter (Wisconsin). Went to start it the first time, just to check it and just to run it for a while. First thing, dead battery, so charged it up and fired it up no problem, except the traction controle light was on and the dsc light was flashing, My question is why? Didnt do anything to it, other than the dead battery for maby a month, that should affect that. So i let it run and now have a battery maintainer on the battery to keep it up while not useing it. Lights still on a week later after i let it sit with the maintainer on. So any ideas guys? I tried to cover everything i did here so hopefuly someone can help. Thanks!
Reply
Old Jan 15, 2009 | 05:35 PM
  #2  
skrubol's Avatar
Registered
iTrader: (1)
 
Joined: Sep 2007
Posts: 349
Likes: 0
From: Southeast NH
Maybe try turning the steering wheel from lock to lock while it's running? Might be that the stability and traction control lost their programming and need to relearn.
Reply
Old Jan 15, 2009 | 05:35 PM
  #3  
expo1's Avatar
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 3
From: Manchester, NJ
Look up DSC in your owners manual and you will find your answer as to why this happened and how to fix it. You can also search this site. If you don't have a manual you can get one from www.mazdausa.com
Reply
Old Jan 15, 2009 | 05:38 PM
  #4  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,286
Likes: 184
From: A Pacific Island.
Hey Expo!

Where ya bin??

S
Reply
Old Jan 15, 2009 | 06:28 PM
  #5  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
search the boards and u will find the answer....hint hint needs needs reset from having power (dead battery) disconnected
Reply
Old Jan 15, 2009 | 06:31 PM
  #6  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
AZ

Originally Posted by expo1
Look up DSC in your owners manual and you will find your answer as to why this happened and how to fix it. You can also search this site. If you don't have a manual you can get one from www.mazdausa.com
Reply
Old Jan 15, 2009 | 06:41 PM
  #7  
expo1's Avatar
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 3
From: Manchester, NJ
Originally Posted by StealthTL
Hey Expo!

Where ya bin??

S
I am still around, wish I was someplace warm.
Reply
Old Jan 16, 2009 | 03:20 AM
  #8  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
Originally Posted by StealthTL
Hey Expo!

Where ya bin??

S
wow,

he is around more than you..

i kid.. i kid..

expo. cool to see you.

beers
Reply
Old Jan 16, 2009 | 06:13 PM
  #9  
d_mashuda's Avatar
Thread Starter
Registered
 
Joined: Jun 2008
Posts: 39
Likes: 0
From: Princeton, Wi
Hey thanks for the help and hints guies, i got lookin around and figured that was the deal, just wanted to be sure and put my mind at ease. I will give it a try and make sure thats the prob!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OfficerFarva
RX-8's For Sale/Wanted
16
Dec 5, 2015 10:53 AM
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
Evan Gray
Series I Trouble Shooting
0
Sep 26, 2015 12:30 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 11:16 PM.