fan will not cut off after shutting car off?
06-23-2008, 12:15 AM
#27
3-wheeler
Join Date: Dec 2005
Location: Phoenix
Posts: 2,734
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, for anyone like myself running a race battery, I usually have to babysit the car after a hot shut down. I'll let it idle for a couple minutes to stabilize the temps and then shut it down. When the temps drop below 200 degrees I'll power on the car, make sure my fan switch is off and then shut the car down. This forces the fan to stop.
I've let the fans run and came back to a dead car. Thankfully my protection switch tripped so it didn't allow the car to totally drain the battery.
I've let the fans run and came back to a dead car. Thankfully my protection switch tripped so it didn't allow the car to totally drain the battery.
05-10-2018, 06:11 AM
#29
New Member
Join Date: May 2018
Location: Melbourne
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know why thermos would run constantly have installed the rx8 cooling kit mazsport with the two relays attached to wire with ground started car from being cold and they come on with ignition and dont go off untill turn car off about 10seconds after being turned off anyone can help to know why they would run constantly
05-10-2018, 10:25 AM
#33
New Member
Join Date: May 2018
Location: Melbourne
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
i need to have something making thermos come on sooner than factory because temp getting to 100 degress on autometer gauge and dont want to cook motor its had thousands spent on it its race ported 13b turbo
05-10-2018, 10:38 AM
#35
New Member
Join Date: May 2018
Location: Melbourne
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
05-10-2018, 10:43 AM
#36
SARX Legend
iTrader: (46)
I have the Flex a lite 420 fan setup and I am turbocharged and I have to really be beating on it in 100+F weather to get it above 215F. FAL also sells the 490 setup which flows even more. I do have a dual pass aluminum radiator as well. The FAL setups has been working well in my car for several years, you just cut the connectors off and wire it in like stock.
05-10-2018, 10:51 AM
#37
New Member
Join Date: May 2018
Location: Melbourne
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I have the Flex a lite 420 fan setup and I am turbocharged and I have to really be beating on it in 100+F weather to get it above 215F. FAL also sells the 490 setup which flows even more. I do have a dual pass aluminum radiator as well. The FAL setups has been working well in my car for several years, you just cut the connectors off and wire it in like stock.
Thread
Thread Starter
Forum
Replies
Last Post
