DRL Module Removal?
Thread Starter
Registered User
Joined: Feb 2010
Posts: 21
Likes: 0
From: Chilliwack, BC
SAME! But I replaced both HID Lights.. SO PLEASE HELP NIK!!
Extraordinary Engineering
Joined: Oct 2005
Posts: 4,733
Likes: 14
From: Burls On
Repair it with this DIY
https://www.rx8club.com/series-i-do-...repair-218452/
To bypass it you need to remove the two relays and run jumper wires across the relay pins representing the path for the high beam function... SHOULD BE THE NORMALLY CLOSED PATH.
Big advantage: you can reverse it by installing the relays if you sell the car
https://www.rx8club.com/series-i-do-...repair-218452/
To bypass it you need to remove the two relays and run jumper wires across the relay pins representing the path for the high beam function... SHOULD BE THE NORMALLY CLOSED PATH.
Big advantage: you can reverse it by installing the relays if you sell the car
Last edited by DarkBrew; Jun 21, 2013 at 10:23 PM.
Registered
Joined: Jul 2011
Posts: 38
Likes: 0
From: Mississauga Ontario
Repair it with this DIY
https://www.rx8club.com/series-i-do-...repair-218452/
To bypass it you need to remove the two relays and run jumper wires across the relay pins representing the path for the high beam function... SHOULD BE THE NORMALLY CLOSED PATH.
Big advantage: you can reverse it by installing the relays if you sell the car
https://www.rx8club.com/series-i-do-...repair-218452/
To bypass it you need to remove the two relays and run jumper wires across the relay pins representing the path for the high beam function... SHOULD BE THE NORMALLY CLOSED PATH.
Big advantage: you can reverse it by installing the relays if you sell the car
Registered
Joined: Oct 2010
Posts: 15
Likes: 0
From: Chestermere AB
Mine hasn't worked for about 2 years ..... I've had so meany issues with this car it's been low on my list
But here is a quote for just the part .... Without fitting it
Yeah insane $160 +GST and labour
This is at sunridge mazda in Calgary. I'm now looking for on online.
But here is a quote for just the part .... Without fitting it
Yeah insane $160 +GST and labour
This is at sunridge mazda in Calgary. I'm now looking for on online.
Thread
Thread Starter
Forum
Replies
Last Post
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
Sep 29, 2015 05:05 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM
