Door handle removal question
#1
Registered
Thread Starter
Door handle removal question
Hey guys im getting my car wrapped soon and i need to know how to remove the outside door handle cover ? Is it just clipped in place ? I searched and cant find infos
Thanks
Thanks
#3
Instagram @slowpandemrx8
iTrader: (6)
You have to work from the inside the door panel. Take the panel off and then look for two 10mm bolts. There will be one near the front and back parts of the handle. Also, there will be a small plastic retaining clip to the handle that opens the door. Unclip that plastic clip and keep it on the rod. Lastly, pull the handle open, then back, an it should just swing on out of there. Good luck and hope this helps.
#4
Registered
Thread Starter
You have to work from the inside the door panel. Take the panel off and then look for two 10mm bolts. There will be one near the front and back parts of the handle. Also, there will be a small plastic retaining clip to the handle that opens the door. Unclip that plastic clip and keep it on the rod. Lastly, pull the handle open, then back, an it should just swing on out of there. Good luck and hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
BigMikeATL
RX-8's For Sale/Wanted
12
05-26-2016 12:31 AM
Junirol
RX-8 Parts For Sale/Wanted
43
09-22-2015 06:02 AM