Catalytic Converter Max Temp
#1
Former RX8 Owner.
Thread Starter
Join Date: Sep 2003
Location: Corrales, NM
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Catalytic Converter Max Temp
As part of this latest 'lost power' issue I decided to connect the Harrison scanner and record versus sensors while driving home from work - the hot part of the day. While I have not yet had the loss of power issue with the computer connected I had noticed what I would think is a high catalytic converter temp - as high as 1730 degrees. For a short period of time however. Mid 1600's isn't unusual however.
I did a considerable amount of 'searching' on this forum and I see several topics that say 1600 seems high, and one that said rotary engines' CAT can go as high as 2000 - which is really a bit much.
Has anyone else connected the scanner and observered CAT temps....and what was the highest seen?
I did a considerable amount of 'searching' on this forum and I see several topics that say 1600 seems high, and one that said rotary engines' CAT can go as high as 2000 - which is really a bit much.
Has anyone else connected the scanner and observered CAT temps....and what was the highest seen?
#2
Former RX8 Owner.
Thread Starter
Join Date: Sep 2003
Location: Corrales, NM
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
feeling is sluggish...at least for me...and then only for a short period of time. Check this forum for more information
https://www.rx8club.com/series-i-trouble-shooting-95/power-loss-then-died-62339/
https://www.rx8club.com/series-i-trouble-shooting-95/power-loss-then-died-62339/
#3
Registered
iTrader: (3)
Last year (and in talking with Canzoomer then) the high temp in the cat was discussed. This subject came up because they where looking into going to a high flow cat. At that time the high flow cats out there could not be mounted because they could not tolerate a 1600-1700 degree temp. They where designed for piston engines and their 1200 degress. So the knowledge that the cat is reaching 1700 is not new. However, I have never heard anyone going over 1700 either. Just for your info .
Olddragger
Olddragger
Thread
Thread Starter
Forum
Replies
Last Post
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM