ATTN: GReddy Turbo Kit owners
#1
ATTN: GReddy Turbo Kit owners
Hello everyone, my name is Benny and I work for the R&D department of GReddy Performance Products. First of all I would like to thank you all for supporting our products. I am writing regarding an update for the plug and play harness for the RX-8 turbo kit. Over the past couple of months TRUST Japan and GReddy USA have been doing testing to find ways to remove the check engine light codes P0410 and/or P0131. We have come up with a simple solution and it is now ready to be shipped to those who need the update. Just for your information, this check engine light will not affect the drivability of the vehicle in any way, as it is a code for the cold start emissions. The performance of the vehicle will not be changed by removing this check engine light.
There are actually three different harnesses out right now. The people I need to get in contact with are those that originally had two black adapters on the plug and play harness. Please confirm whether you have two adapter on your plug and play harness where it plugs into the stock ECU. If it does have two adapters, email me at tech@greddy.com. Also please include your emanage serial number in the message. The Emanage serial number is a 5 digit number on the bottom of the emanage case. The update for this kit is the addition of a third adapter on the plug and play harness. I will email instructions on what to do next after you send an email with the emanage serial number.
If your plug and play harness originally had three adapters and was purchased before June 1, please contact the authorized GReddy Dealer you purchased the turbo kit from for an update harness. I have already sent out the update parts to our Authorized Dealers, so please contact them for the update parts. I am only handling the harnesses with two adapter on them at this time.
If you purchased your kit after June 1 and you do not have any check engine light, you do not need to do anything. The last batch of plug and play harnesses have these updates on them already and do not need any modifying.
Thanks again for choosing GReddy Products!
Benny
There are actually three different harnesses out right now. The people I need to get in contact with are those that originally had two black adapters on the plug and play harness. Please confirm whether you have two adapter on your plug and play harness where it plugs into the stock ECU. If it does have two adapters, email me at tech@greddy.com. Also please include your emanage serial number in the message. The Emanage serial number is a 5 digit number on the bottom of the emanage case. The update for this kit is the addition of a third adapter on the plug and play harness. I will email instructions on what to do next after you send an email with the emanage serial number.
If your plug and play harness originally had three adapters and was purchased before June 1, please contact the authorized GReddy Dealer you purchased the turbo kit from for an update harness. I have already sent out the update parts to our Authorized Dealers, so please contact them for the update parts. I am only handling the harnesses with two adapter on them at this time.
If you purchased your kit after June 1 and you do not have any check engine light, you do not need to do anything. The last batch of plug and play harnesses have these updates on them already and do not need any modifying.
Thanks again for choosing GReddy Products!
Benny
Last edited by Benny; 06-30-2005 at 12:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM