Greddy Turbo working on auto RX8
#126
laulongfei
Join Date: Nov 2006
Location: San Francisco,CA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
#128
Original Turbo 'd Auto !!
The 07 + Rx-8 is an easier canidate for FI. just because it's a 6 port motor there are many more availble maps
Hey CbRotary. Attached are the requested pics of the vac source for the boost gague and BOV. The other pic is of the vac source for the Wastegate coming off of the turbo's charge pipe.
Hey CbRotary. Attached are the requested pics of the vac source for the boost gague and BOV. The other pic is of the vac source for the Wastegate coming off of the turbo's charge pipe.
#129
laulongfei
Join Date: Nov 2006
Location: San Francisco,CA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
The 07 + Rx-8 is an easier canidate for FI. just because it's a 6 port motor there are many more availble maps
Hey CbRotary. Attached are the requested pics of the vac source for the boost gague and BOV. The other pic is of the vac source for the Wastegate coming off of the turbo's charge pipe.
Hey CbRotary. Attached are the requested pics of the vac source for the boost gague and BOV. The other pic is of the vac source for the Wastegate coming off of the turbo's charge pipe.
#130
Original Turbo 'd Auto !!
To date for AFR sensor, Boost and AFr Gauges, used greedy kit, + rebuild kit for tubo, new sillykone hoses, hi-flo meow meow, and some payed labor and tuning.
$3825.
Doing it yourself saves a boatload on labor dollars.
$3825.
Doing it yourself saves a boatload on labor dollars.
#131
laulongfei
Join Date: Nov 2006
Location: San Francisco,CA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
#134
Original Turbo 'd Auto !!
#137
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-cooler-install-112522/
one pic of the engine bay. I think its his?
#138
dave i just finished doing the t off tonight i winded up putting it on the intercooler pipe that connnects right to the top of the turbo because the turbo is in such an ungodly area that i was not ever goign to rip that **** out again lol so i winded up putting it as close to the turbo as possible and it worked good im still spiking liek one or 2 lbs but nothing major liek before but idk i know im atleast spiking 1 lbs of boost i need to get on my car more and see if thats all. thanks though for the pics.
#139
Original Turbo 'd Auto !!
That's mine. it's looks a little different now but not by much.
dave i just finished doing the t off tonight i winded up putting it on the intercooler pipe that connnects right to the top of the turbo because the turbo is in such an ungodly area that i was not ever goign to rip that **** out again lol so i winded up putting it as close to the turbo as possible and it worked good.
im still spiking liek one or 2 lbs but nothing major liek before but idk i know im atleast spiking 1 lbs of boost i need to get on my car more and see if thats all. thanks though for the pics.
If it's on which it sound like it is, turn it off. Go for a drive and you should see around 5psi.
Last edited by 09Factor; 08-02-2008 at 11:07 AM.
#140
actually i dont have a boost controller in yet i had ordered the mms by greddy and mis understood it and thought it was a boost controller and it is not so now i have to retur it and need to get a boost controller but i want a simple boost controller nothing crazy. i just want one that has 2 modes A and B. what kind do you have cause i dont want a manual one and i dont want all the crazy fancy gadgets lol
suggestions?
suggestions?
#141
^check this out
http://www.aempower.com/ViewCategory.aspx?CategoryID=68
http://www.aempower.com/ViewCategory.aspx?CategoryID=68
#143
laulongfei
Join Date: Nov 2006
Location: San Francisco,CA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Do anyone of you know what's the difference between RE-Amemiya trust turbo kit and Greddy's? I know they are the same except the computer set up. And according to them it can push 240 or 270 ps and when Rick's rotary install the greddy turbo on his car it blew the trans. Is that mean that Somehow the RE-turbo are more reliable and difference than greddy turbo that have to be adjust?
Last edited by laulongfei; 08-04-2008 at 03:15 AM.
#144
Boost Virgin Gonnabe
iTrader: (1)
Join Date: Oct 2007
Location: san mateo
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
just to let you guys know. apex8 aka rick from (rick's rotary performance in pleasanton, ca) wouldn't do a turbo installation anymore on rx-8. the last time i talked to him regarding a turbo for mu automatic , he said he wouldn't do it and he doesn't want to get involved if anything happens to the engine.
#146
just to let you guys know. apex8 aka rick from (rick's rotary performance in pleasanton, ca) wouldn't do a turbo installation anymore on rx-8. the last time i talked to him regarding a turbo for mu automatic , he said he wouldn't do it and he doesn't want to get involved if anything happens to the engine.
#150
laulongfei
Join Date: Nov 2006
Location: San Francisco,CA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
I hate to say but i am agree with you after seen so many sucessful auto turbo, I don't get how did he break the tranny.
BTW, its sad that san francisco bay area have no body are good enough to do auto turbo rx8. especially when there is so many resident is sf bay
BTW, its sad that san francisco bay area have no body are good enough to do auto turbo rx8. especially when there is so many resident is sf bay