500hp and a 45mm wastegate?
The welds look as if they were made by a blind man. |
Originally Posted by Slidin8
(Post 4493692)
I don't see how this Renny upgrade is worth it when you can REW swap for so much less
^ Couldn't of said it better myself. For most renny builds after you spend all that money on boosting a Renesis you find out two things.... Your stuck at sub 300 hp and with a tricking time BOMB. :sad: . |
Yeah pretty much. An engine swap is the only way to go if you want to make more than 325HP reliably.
|
I'm sure you can 20b for less than 30k
I don't understand how this is so expensive, even the Hymee supercharger kit is $12300 I know Aussie wages are very good but these prices are just insane |
I see the Rx8 forum bashing machine will enjoy this thread.
|
No bashing here Brettus, you know me, if there is an easy way to get power I'm keen!! As long as its not me doing the work its safe!, lol.
By the way....BBEEEEERRRRRR. |
1 Attachment(s)
Originally Posted by Stephen T
(Post 4493967)
BBEEEEERRRRRR.
|
In Australia we cannot transplant a 20B for road use and you can only put a REW into a 2003 model. I am not sure how these guys will achieve 500HP at the wheels however, it will be interesting to see the results when they get there.
We have all seen similar claims before and they have turned out to be failures however, these guys have a good track record. I do understand that this power will be based on using E85 which is not really ideal for daily use due to the lack of bowsers that carry the fuel. |
For boost rew absolutely easiest & cheapest way but we need reliable msp engine in my opinion if anybody manages reliable renesis i think the day of 8 pride is begining. How about mazdatrix hybrid msp now has anybody know the details of it ?
|
who cares where they land ultimately.... they've got a solid mission statement and the community will benefit from it.
|
LOL @ ANYONE that thinks the REW is the answer to a reliable booted 8. There is a reason the LSx swap is popular with the 7 community. l'm not banging on the REW either. I love that engine. Just saying it is not the solution for reliable boost.
|
Originally Posted by pdxhak
(Post 4494211)
LOL @ ANYONE that thinks the REW is the answer to a reliable booted 8. There is a reason the LSx swap is popular with the 7 community. l'm not banging on the REW either. I love that engine. Just saying it is not the solution for reliable boost.
Just a guess really... |
Even if it is still does not make the REW reliable :)
|
Most of the problems the REW units show are either builder-related or tune-related. They can be fairly reliable at power levels the renesis can only dream about!
|
Originally Posted by pdxhak
(Post 4494211)
LOL @ ANYONE that thinks the REW is the answer to a reliable booted 8. There is a reason the LSx swap is popular with the 7 community. l'm not banging on the REW either. I love that engine. Just saying it is not the solution for reliable boost.
. |
Originally Posted by shadycrew31
(Post 4494216)
I'd say an REW running 12PSI on a single turbo setup making 330 whp would be more reliable than a renny running 12 psi making 33whp.
Just a guess really... I daily drive around town @ 12psi which is about in that 330 area. Still enough to spin the tires in 3rd gear and scare the kids in the back seat :lol: |
I'm not comparing the MSP to the REW. So everyone step back and put their daggers away.
|
LSX swaps for all!
|
Originally Posted by shadycrew31
(Post 4494216)
I'd say an REW running 12PSI on a single turbo setup making 330 whp would be more reliable than a renny running 12 psi making 330whp.
Just a guess really... As far as 500whp being reliable - I'm just as skeptical as anyone I but live in hope .... |
https://fbcdn-sphotos-c-a.akamaihd.n...59984765_n.jpg
"Rocky and son Peter have just finished assembling the Renesis 13B engine for our 'Project 500' RX8. Nothing too fancy inside, just some basic tidying of the ports and strengthening measures carried out in preparation for its boosted future... Who else is hanging to see 'Project 500' hit the strip...? -Pac Performance " |
I envy people who can live the dream and share it with their children!
|
I saw one post at rx8club.au if everything as they write is true. Renesis Territory Begin..
RX8 Club Australia • View topic - PAC Performance Project 500 Just spoke to Rodney at PAC performance.. Pretty damn surprising!! 1. 500hp is actually at the rears not the flywheel! 2. Kit is completely compatibly with S2 8's 3. They are installing the kit on an auto 8 right now 4. They have tuned a haltech for an S2 GT in the past and are using haltech for this set up 5. The price is 30k, with full rebuild included in the price, rebuild is basically strengthening all internals, custom fabricated apex seals used in PAC race cars tailored for the 8, etc.. 6. Kit has and is still being used in 3 cars to date, one being mazda motorsports targa 8, which has still had no problems. 7. Rodney says "I can pretty much guarantee, that as long as nothing stupid (i.e running on low oil) happens to the car, you won't have any problems. |
Originally Posted by thunderberk
(Post 4496016)
I saw one post at rx8club.au if everything as they write is true. Renesis Territory Begin..
RX8 Club Australia • View topic - PAC Performance Project 500 Just spoke to Rodney at PAC performance.. Pretty damn surprising!! 1. 500hp is actually at the rears not the flywheel! 2. Kit is completely compatibly with S2 8's 3. They are installing the kit on an auto 8 right now 4. They have tuned a haltech for an S2 GT in the past and are using haltech for this set up 5. The price is 30k, with full rebuild included in the price, rebuild is basically strengthening all internals, custom fabricated apex seals used in PAC race cars tailored for the 8, etc.. 6. Kit has and is still being used in 3 cars to date, one being mazda motorsports targa 8, which has still had no problems. 7. Rodney says "I can pretty much guarantee, that as long as nothing stupid (i.e running on low oil) happens to the car, you won't have any problems. |
http://www.pacperformance.com.au/Art...a762870687.jpg
We've been making some solid progress on our ‘Project 500’ RX8 build, working on the car after hours and in-between the usual day-to-day jobs. As always, customer jobs come first and our own toys a close second… http://www.pacperformance.com.au/Art...9f9585a8b7.jpg Our fabricator Ross has now finished off the turbo mounting side of things including mounting of the Turbosmart 45mm Hyper Gate and fabricating a three inch dump pipe. Everything is tucked up nice and neat to ensure clearance is never an issue whilst still retaining ease of access. http://www.pacperformance.com.au/Art...5c0d7d752c.jpg With the Garrett turbo mounted in place Ross then moved onto the cooling and intake side of things, fabbing up alloy piping for the front mount intercooler. You can also see in this photo the start of the turbo air intake that will run into the standard air box. http://www.pacperformance.com.au/Art...9d291ab35f.jpg The intercooler itself is a chunky Pac Performance four inch bar and plate unit that will have no issues cooling the charged air. Mounted via custom brackets it sits in a V-Mount position to ensure no loss of flow through the radiator core. To ensure there is ample flow through the intercooler ducting and baffles will me put in place to help guide fresh air through the core. This mounting style was used on the Mazda Australia Targa Tasmania cars with great results for both intake and water temps whether the cars were cruising or going flat out. http://www.pacperformance.com.au/Art...8d61a1e875.jpg The radiator is also upgraded as part of the package, with a quality alloy PWR unit taking place of the original core. http://www.pacperformance.com.au/Art...915be705c9.jpg Apart from a quick tidy up of the ports, new Pac Performance seals and extra dowels the engine as Mazda intended. Rather than go crazy with the engine itself the bulk of the power increase will come from the carefully-selected bolt-ons and of course the all-important tune via the Haltech PS2000 ECU. http://www.pacperformance.com.au/Art...b5104e7205.jpg Lastly we also received the Mazdaspeed front bar that’s part of the package and will be fitted to ‘Project 500’. On top of the much cleaner and meaner look it will give the car it also offers increased air flow to the entire cooling system. http://www.pacperformance.com.au/Art...f410223e99.jpg http://www.pacperformance.com.au/Art...46ca363add.jpg http://www.pacperformance.com.au/Art...4f82eace54.jpg http://www.pacperformance.com.au/Art...a2cc824fca.jpg |
Nice fab work, what are you doing for and engine mount? That's not a Mazdaspeed front bumper, BTW. It would be sad to see a shop in the industry using knock off parts.
|
All times are GMT -5. The time now is 07:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands