Stage 4 Pac Performance Low Mount Turbo Package
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Paramaribo, Suriname ( South America )
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
Stage 4 Pac Performance Low Mount Turbo Package
PAC PERFORMANCE 'PROJECT 500' RX8
For some time now Pac Performance has been revered for building some of the countries toughest rotary street cars. After years of R&D we believe we have created combinations and packages that deliver the three main ingredients that we consider essential for this kind of application; Power, Response & Reliability.
The Pac Performance ‘Project 500’ RX8 is an in-house build being developed to showcase our Stage 4 upgrade package for the Mazda RX8. This is the ultimate power package upgrade for your RX8, transforming it from a mild-mannered cruiser to an exotic killer whilst still retaining a stock-like appearance, drivability and reliability. Drive in, drive out.
The Pac Performance Stage 4 upgrade is the same package as used on the Mazda Australia Targa Tasmania cars and includes a full engine rebuild with upgraded seals, extra doweling and turbo porting.
Helping the 13B Renesis engine do its thing will be a custom Pac Performance-spec'd Garrett turbo built specifically for this application; mounted on a custom-built steam pipe manifold. In an effort to retain a factory appearance under the hood, keep the manifold and exhaust design simple and very importantly, maintain the cars great balance, the turbo setup has been mounted nice and low.
This positioning necessitated some clearancing to be done on the factory cross member which is carried out by our in-house fabricator Ross.
Although a large amount of material is removed, it is replaced with much thicker steel plating and substantial re-enforcing and bracing will be carried out, making the modified cross member much stronger than the original.
Every aspect of this kit has been thoroughly researched with a lot of effort being put into strengthening, clearance and ease of access; aspects that other manufacturers often miss-prioritise or even overlook completely when developing so-called bolt-on ‘kits’.
At Pac performance we pride ourselves in the quality of our work and so with all of our builds we only use quality, proven parts. In saying this, that's exactly what you will find in the Pac Performance Stage 4 Power Package. Top-shelf components from Garrett, Haltech, Turbosmart are utilised throughout making this package quality from every angle. Drive in with a mild mannered cruiser, drive out with an exotic-killer!
Every aspect of the upgrade has been covered as can be seen in the spec list below;
Engine rebuild including new seals, doweling and porting
Custom Garrett turbo spec'd specifically for application
Custom steam pipe exhaust manifold
Turbosmart 45mm Hypergate external wastegate & plumb back BOV
Full turbo-back exhaust
Haltech Platinum Sport 2000 ECU with Flex Fuel sensor
Pac Performance alloy radiator
Pac Performance front mount intercooler and alloy piping
Turbosmart eBoost2 boost controller
2000cc injectors and dual in-tank pump upgrade for E85
Turbosmart FPR1200 fuel pressure regulator
Clutch and flywheel upgrade
Mazdaspeed front bar (unpainted) for increased air flow to intercooler
Removal and re-install of engine and accessories
Replace all fluids
Drive in drive out
Stay tuned for more updates soon.
For some time now Pac Performance has been revered for building some of the countries toughest rotary street cars. After years of R&D we believe we have created combinations and packages that deliver the three main ingredients that we consider essential for this kind of application; Power, Response & Reliability.
The Pac Performance ‘Project 500’ RX8 is an in-house build being developed to showcase our Stage 4 upgrade package for the Mazda RX8. This is the ultimate power package upgrade for your RX8, transforming it from a mild-mannered cruiser to an exotic killer whilst still retaining a stock-like appearance, drivability and reliability. Drive in, drive out.
The Pac Performance Stage 4 upgrade is the same package as used on the Mazda Australia Targa Tasmania cars and includes a full engine rebuild with upgraded seals, extra doweling and turbo porting.
Helping the 13B Renesis engine do its thing will be a custom Pac Performance-spec'd Garrett turbo built specifically for this application; mounted on a custom-built steam pipe manifold. In an effort to retain a factory appearance under the hood, keep the manifold and exhaust design simple and very importantly, maintain the cars great balance, the turbo setup has been mounted nice and low.
This positioning necessitated some clearancing to be done on the factory cross member which is carried out by our in-house fabricator Ross.
Although a large amount of material is removed, it is replaced with much thicker steel plating and substantial re-enforcing and bracing will be carried out, making the modified cross member much stronger than the original.
Every aspect of this kit has been thoroughly researched with a lot of effort being put into strengthening, clearance and ease of access; aspects that other manufacturers often miss-prioritise or even overlook completely when developing so-called bolt-on ‘kits’.
At Pac performance we pride ourselves in the quality of our work and so with all of our builds we only use quality, proven parts. In saying this, that's exactly what you will find in the Pac Performance Stage 4 Power Package. Top-shelf components from Garrett, Haltech, Turbosmart are utilised throughout making this package quality from every angle. Drive in with a mild mannered cruiser, drive out with an exotic-killer!
Every aspect of the upgrade has been covered as can be seen in the spec list below;
Engine rebuild including new seals, doweling and porting
Custom Garrett turbo spec'd specifically for application
Custom steam pipe exhaust manifold
Turbosmart 45mm Hypergate external wastegate & plumb back BOV
Full turbo-back exhaust
Haltech Platinum Sport 2000 ECU with Flex Fuel sensor
Pac Performance alloy radiator
Pac Performance front mount intercooler and alloy piping
Turbosmart eBoost2 boost controller
2000cc injectors and dual in-tank pump upgrade for E85
Turbosmart FPR1200 fuel pressure regulator
Clutch and flywheel upgrade
Mazdaspeed front bar (unpainted) for increased air flow to intercooler
Removal and re-install of engine and accessories
Replace all fluids
Drive in drive out
Stay tuned for more updates soon.
Last edited by RotaryTherapy; 06-24-2013 at 07:05 AM.
#4
rev it up
$30 000 AUD for the full package that includes an engine rebuild. It is a drive in drive out service
The reason it is called the 500 project as the power output at the wheels will be 500hp. It is also S2 compatible.
So if you have deep pockets then this will be the ultimate RX8
The reason it is called the 500 project as the power output at the wheels will be 500hp. It is also S2 compatible.
So if you have deep pockets then this will be the ultimate RX8
#7
I wonder how reliable is this ? Esmeril made a project like isn't it unreliable ? Are they know how about SP turbo Rx-8 ? What's the details of these power figures reliability or trick is e85 ?
#12
rev it up
Here is some info: Mazda RX-8 SP for Targa Tasmania | CarAdvice
Ric shaw had purchased one and did it up and was on sale for around $60k. I think it has sold. He also has a brand new engine with strengthened internals currently for sale.
Ric shaw had purchased one and did it up and was on sale for around $60k. I think it has sold. He also has a brand new engine with strengthened internals currently for sale.
#15
That manifold equals for better flow i think, after porting big pipe diameter and flow better for boosting quicker and better.
Has anyone tell me how many kilometers reliable turbo Rx-8 goes ? Totally engine life after FI ?
Has anyone tell me how many kilometers reliable turbo Rx-8 goes ? Totally engine life after FI ?
#18
On the aus forum we have been told 500hp atw, and our dynos generally read lower than yours over there.
#20
Un-Registered User
$30 000 AUD for the full package that includes an engine rebuild. It is a drive in drive out service
The reason it is called the 500 project as the power output at the wheels will be 500hp. It is also S2 compatible.
So if you have deep pockets then this will be the ultimate RX8
The reason it is called the 500 project as the power output at the wheels will be 500hp. It is also S2 compatible.
So if you have deep pockets then this will be the ultimate RX8
I don't see how this Renny upgrade is worth it when you can REW swap for so much less
#21
Bikes are Rotaries
Join Date: Feb 2013
Location: Kerikeri, NZ
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
That makes me almost want to break my engine!!!!
#23
Un-Registered User
#25
no agenda
iTrader: (2)
Not in the least which should also be mentioned is all the bitching and moaning you hear over people being told to expect 10k USD just for a descent FI setup.
Can you imagine the wailing over 30k?
+1 ... sub'd