Well, its time to move on so I decided to move back up to MD. I plan on setting up shop there ASAP for those in the area. It might take some time to get up and running. Im pulling out of my house here and hope to buy one up there but im doing a short sale of my house down here so im going to take a hit on my credit. My brother is going to help me settle in up there but we are still searching for either land to build a house on or a good deal on built house with a good amount of property in Fredrick so I can build a HUGE garage/ fab shop. Wish me luck.

 

What happenend Moon?

 

Sorry to hear your short selling but I do wish you luck with your move.

 

any updates with our map yet Phil?

 

Yup, if the creek don't rise and the power fail with the computer again, the map should be up in a trial form by the end of the month. Look for it on the 1st post of the thread. My helper's computer died half way thru the map. It is supposed to be up now so we will see.

 

Dang Moon it wont be the same without you at Pettit. Dude wish you the best---1st winter and I bet you will want to become a snowbird!
Please stay in touch.
olddragger

 

Well, all I have to say is its just time to move on. I didnt really want to move down here to FL but I was told buy my doctors that the metal in my back would never come out. If you can imagine what cold weather can do to metal just bellow your skin youd now why I moved to FL. Its all out of my body now and im not effected buy the cold like used to be. I have alot of friends still up there and im kinda home sick also.

 

Moon,
I am happy you were able to have the metal removed, and wish you the best of luck in Maryland, but do not think you can get away from us that easy......
I hope you are never that far away that you cannot log on this board.

 

he'll still be on,,, now hes about a half hour away from me an we desperately need a rotary tech up here,,, plus this will make the development of the Street Ray that much easier... We are glad to have Moon come back to his roots...

 

Yeh, lookout Baltimore, here I come.

 

It was brought up to me buy Greg about the coolers to relive the high temps of the 8s in warm weather. Gregs kit is ready to rock but Cam needs some motivation on getting them into production so give him a call and tell him your interested, itl get him to start mass producing them and im positive its going to fix the hot engine temps. From the testing weve done on Cams car it deffinatly showed a major improvement.

 

I had a request already for a turbo instal, hell no. Im never installing another turbo on an 8, I have to get that strait.

 

hey guys had some fun today in the same spot where my cat blew out at 120mph...
Hit 128mph before having to let off for traffic... Man the shift from 5th to 6th gear at around 120mph sounds absolutely wicked.....

 

Better watch it up there, you dont need a ticket. Or on the other note, this could happen. Take into consideration dont try to dodge this from happinin, just hit it and stop but im not cleaning it, you gotta get the hair and guts out of the pullys, lol.

 

I just hit a fox too.. They can do some damage I tell you! 8(

 

Is anyone running the yukon coils? I know Juan has those super duper msd's but is anyone else running an aftermarket ignition setup? How did yall mount etc?
olddragger

 

Nope wiating fo rBHR to work out thier problems with thier setup, I jsut sold my unopened Mazsport kit...

 

what exactly is the problem with the bhr kit? Dwell?
If that is it --does cam change dwell with his flash--I dont think he does?
I have been running the yukons for some months now without a prob? Should I go back to the oems?
Rather be safe than sorry.
OD

 

I had four LS2 coils till last night, my MSD coils came in yesterday.
My bracket will not hold 4 of the MSD coils, they are wider than the LS2s.
I now have 2 MSD 8247 coils on the leading plugs, and 2 LS2 coils on the trailing side.
I have not really meant to run it hard it since the coil change, but it is so smooth, I didn't notice and hit 7K

Spark plugs are gapped at .035
Spark plug wires are MSD 8.5 mm.

 

Charles created a whole thread about it in the aftermarket section, and is most pertanate to us FI guys...

 

Hi all !!

just a good news (for me )

I start the installation of my pettit kit :D
I Can't wait !!!!!!!!!!!!!
(And I add to the kit the racing beat ram air duct :Lol: )

 

Congrats man! First Pettit kit in the West Indies

 

yup congrats, Ibet your so anxious you cant sleep,,, thats what happened to me during my install...

 

Left Pettit Racing's shop in Palm Beach with 17,778 miles and a supercharger almost two years ago.





20,000 miles later, still kicking ***!

 

Nice, lots of track days, dyno days, 1/4 miles and not much down time listening to yoga music, lol.