The Official Overboosted Overlords Club
To be fair to my dyno run of homo-ness.
The first half was actual acceleration - and it was pretty on par with my actual dyno's - <300 with a 3/4 throttle run... it was that HUGE spike that was when things went wrong.
It also rated my wifes car at 260WHP - factory sepcs are 274 to the crank... so close if a bit on the high side.
The first half was actual acceleration - and it was pretty on par with my actual dyno's - <300 with a 3/4 throttle run... it was that HUGE spike that was when things went wrong.
It also rated my wifes car at 260WHP - factory sepcs are 274 to the crank... so close if a bit on the high side.
Army F***CKED ME; they won't have orders before I go to school - so I have to move after - teh gay....
So I graduate in Sept - come to HI; pack all my stuff and then fly all the way back to VA... in the Fall - when it is cold.


So I graduate in Sept - come to HI; pack all my stuff and then fly all the way back to VA... in the Fall - when it is cold.


1st RX8 BNR Turbo Owner..
iTrader: (1)
Joined: Feb 2008
Posts: 454
Likes: 2
From: San Antonio, Texas
So is that the next best thing to be in the Overboosted Overlords Club is to be "Baller Status"? And we get this status by posting a 350 rwhp dyno? I wonder if anyone out there is going to do it...chickenwafer give us another dyno at 12 PSI
Can I use the Dynolicious dynometer?? LOL
I actually may get there- not sure yet. I want to go back to UMS sometime in April with 14psi and some race gas for insurance.
I've hit 392 grams a second at the MAF at 11.8psi or so doing a 3rd gear pull (which is 52lbs/min of air), I swear I saw warp speed and my speedo went from MPH to just (!!!).
The problem I think I'm running into is a Calculated Load ceiling right now. My MAF is currently scaled to around 421 g/s maximum at 4.69v. I think 14psi will put me over 400 g/s.
I actually may get there- not sure yet. I want to go back to UMS sometime in April with 14psi and some race gas for insurance.
I've hit 392 grams a second at the MAF at 11.8psi or so doing a 3rd gear pull (which is 52lbs/min of air), I swear I saw warp speed and my speedo went from MPH to just (!!!).
The problem I think I'm running into is a Calculated Load ceiling right now. My MAF is currently scaled to around 421 g/s maximum at 4.69v. I think 14psi will put me over 400 g/s.
Last edited by chickenwafer; Mar 13, 2009 at 03:21 PM.
otherwise there will only be 2or3 members .... oh and I wont make the cut so .....




...



