Nitrous Kits
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: Hampton
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Nitrous Kits
I know alot of people are using zex on the 8's for the FMU, but has anyone used regular wet nos or nitrous works kits without any problem. Also would I need to go to a colder plug with just a 50 - 55 shot?
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: Hampton
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I've used nitrous express on other cars so I will probably go with that, its just more wiring than a zex kit and I would have to use a window or a push button switch. Are the stock plugs good to go with a 50-55 shot or should I go colder?
#9
The Zex kit is going to be the easiest one to install. There should be a couple of build threads where Charles R. Hill took pictures. He also sells a spacer for the nitrous nozzles so he would be the one-stop source for both the infos and the parts you need
#10
Registered
Is anyone boosted and running nitrous?
That might break 400RWHP easily, or break apexes trying.....
Also, why not direct port injection for the nitrous, instead of running it through the intake, tap two nozzle holes on the lower intake, near or almost in the engine intake ports.
Then use two nozzles instead of a single nozzles and the nitrous would not run through the upper intake at all.
That might break 400RWHP easily, or break apexes trying.....
Also, why not direct port injection for the nitrous, instead of running it through the intake, tap two nozzle holes on the lower intake, near or almost in the engine intake ports.
Then use two nozzles instead of a single nozzles and the nitrous would not run through the upper intake at all.
#11
The problem is: how would the nitrous mix with the a\f mixture in such a short distance? Also tuning for it would be a bit more problematic imho
Better use those nozzle for a water\meth system at this point!
Better use those nozzle for a water\meth system at this point!
#16
Rx-8 the protege
iTrader: (1)
Join Date: May 2009
Location: Bronx ''NY"
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Were can I purchase a brand new nitrous kit? I've been searching all day and can't seem to find it! It's probly just me and my searching skills but if u canpoint me in the right direction I would greatly appreciate it!
#21
Rx-8 the protege
iTrader: (1)
Join Date: May 2009
Location: Bronx ''NY"
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
hay alzorz I was reading through thread first I wanna say mad props! I noticed u mounted one of the parts from the kit onto the stock airbox! I have a typhoon 2 intake will that be a problem with this kit
#22
Black on black on black..
Join Date: Mar 2008
Location: Pompano Beach, FL
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
I have the Typhoon 2 aswell and mounted the zex module on the back of the heat shield. drilled the hole into the intake tube and works perfect.
#25
suck my smog
Join Date: Jun 2008
Location: Windsor, Califorina
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
I did the same thing on my k&n V2 some black tape and black wire loom and the CHPs will never find it, I have the TB spacer and stealth nozzle so its super stealth!
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM
Digitz0070
Series I Aftermarket Performance Modifications
5
09-25-2015 10:58 PM