lean condition on full throttle /w greddy turbo kit installed HELP
02-21-2005, 09:34 PM
#81
X-Sapper
Join Date: Jan 2004
Location: where angle's fear to tread
Posts: 2,392
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fanman
Mine ran fine on the street. It is when we dynoed it that it ran into detonation. I hope people know what to look for when they are driving their cars with this kit on it. The re-flashed ECU had no problems the second time we went to the dyno. EGT was around 8 the whole time.
hmm so it only detonated when it was dynoed...glad to hear ou arne't having any issues with the new map:D around 8 on the egt (800 deg. c) is about 1450 deg's f. that doesn't seem to hot on a rotary. wel at least as far as i understand it.
02-21-2005, 11:25 PM
#82
Registered User
iTrader: (-1)
Join Date: Oct 2004
Location: san diego
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
DAMMIt, i ordered my greedy kit 10 minutes ago, and i should read this thread before i order it 
so many problem with the kit already, i should wait until greddy fix those problmes. I hope i can still cancel the kit from vivideracing. cross finger.
so many problem with the kit already, i should wait until greddy fix those problmes. I hope i can still cancel the kit from vivideracing. cross finger.
02-21-2005, 11:30 PM
#83
Registered User
Join Date: Nov 2003
Location: Glendale, CA
Posts: 3,281
Likes: 0
Received 0 Likes
on
0 Posts
Man, you got it from Vivid ? What did they charge you ? They are usually pretty high. Pretty much the best price I have seen is the Gold Pricng on RX8 Garage & City-Speed.
I think now the software has been updated it is OK.
I think now the software has been updated it is OK.
02-22-2005, 05:52 AM
#84
Banned
Join Date: Jan 2004
Location: VA
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
A big thanx to Jeff for getting me where I need to be. Jeff's map is what should have been programmed in my car from the get go. If you are getting this bucking,detonation, and so on load Jeff's map. My car feels great and cant wait to go further.
-Ryan
-Ryan
02-22-2005, 09:54 AM
#86
Originally Posted by Broke_Apex_Seal
A big thanx to Jeff for getting me where I need to be. Jeff's map is what should have been programmed in my car from the get go. If you are getting this bucking,detonation, and so on load Jeff's map. My car feels great and cant wait to go further.
-Ryan
-Ryan
It wasn't the curse of your car, though. It was this "skinning" program I run to make Windows XP more attractive. As soon as I changed "skins", it worked again.
Its interesting - the program you are running now that smoothes out the bucking and detonation actually makes my car buck in those RPM ranges because it is so rich there.
02-22-2005, 10:08 AM
#88
Banned
Join Date: Jan 2004
Location: VA
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MazdaManiac
Wouldn't you know it Ryan - my better laptop started working as soon as you left!
It wasn't the curse of your car, though. It was this "skinning" program I run to make Windows XP more attractive. As soon as I changed "skins", it worked again.
Its interesting - the program you are running now that smoothes out the bucking and detonation actually makes my car buck in those RPM ranges because it is so rich there.
It wasn't the curse of your car, though. It was this "skinning" program I run to make Windows XP more attractive. As soon as I changed "skins", it worked again.
Its interesting - the program you are running now that smoothes out the bucking and detonation actually makes my car buck in those RPM ranges because it is so rich there.
-Ryan
p.s. I am going to test it again at lunch I will report back soon.
02-22-2005, 10:29 AM
#89
It will probably still have some issues until it is completely warmed up.
www.digikey.com can provide the connector: Tyco part# 176116-5.
However, it looks like it might be almost as cheap to get the entire harness from http://www.mohdparts.com/emanage/index.html
www.digikey.com can provide the connector: Tyco part# 176116-5.
However, it looks like it might be almost as cheap to get the entire harness from http://www.mohdparts.com/emanage/index.html
02-22-2005, 10:57 AM
#90
Banned
Join Date: Jan 2004
Location: VA
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Well, now 3rd,4th gear are bogging(3800-4500) when I WOT but only when I start out in low rpms. 1st and 2nd have no bogging so far. We will get together and try your map again.
Ryan
Ryan
. Thanx again Jeff you are da man........
02-22-2005, 01:37 PM
#93
Yeah, just let me know when you have time.
Attached is another MAP. This one is a bit leaner in the middle. This is the MAP I was running until today when I started playing around with the Greddy MAP (I re-wired my injectors the way the Greddy kit is wired).
It might be even better for you.
Attached is another MAP. This one is a bit leaner in the middle. This is the MAP I was running until today when I started playing around with the Greddy MAP (I re-wired my injectors the way the Greddy kit is wired).
It might be even better for you.
02-22-2005, 02:43 PM
#97
AbsolutelyNothingHappenin
Join Date: Mar 2004
Location: Desert, AZ
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fanman
Man, you got it from Vivid ? What did they charge you ? They are usually pretty high. Pretty much the best price I have seen is the Gold Pricng on RX8 Garage & City-Speed.
I think now the software has been updated it is OK.
I think now the software has been updated it is OK.
02-22-2005, 02:53 PM
#98
Originally Posted by Broke_Apex_Seal
that is what I like to hear saaaweeeettttttttttttttttttttt.
where to get the cable from? is it a special cable? At least that is what I am told.
where to get the cable from? is it a special cable? At least that is what I am told.
Last edited by MazdaManiac; 02-22-2005 at 07:07 PM.