Notices
Series I Major Horsepower Upgrades This is the place to discuss Super Chargers and Turbos, Nitrous, Porting, etc
Sponsored by:

Hymee Supercharger Owners

Old 06-12-2018, 01:30 AM
  #51  
Registered
 
Join Date: Nov 2013
Location: Adelaide, South Australia
Posts: 22
Likes: 0
Received 1 Like on 1 Post
Originally Posted by skc View Post


The bolt is the inlet for the oi. Its sits quite high and the top rear will gave sufficient oil

thats very close to the top. Will almost be full of oil.
Will you need an air gap in the gearbox?
Is a larger air gap needed to stop pressure build up in the sealed case?
I canít say if it will work. It might, if it doesnít it could cost you your supercharger.

Also changing the oil will mean removing the whole supercharger each time you need to change the oil.

Sr20gemini is offline  
Old 06-13-2018, 07:16 AM
  #52  
skc
rev it up
 
skc's Avatar
 
Join Date: Feb 2004
Location: Brisbane Australia
Posts: 1,577
Received 10 Likes on 10 Posts
I attached a hose to the return line and capped it so its easy to drain the oil. The inlet is not right at the top so there will be enough space for the oil to reciculate
skc is offline  
Old 03-23-2019, 01:12 PM
  #53  
New Member
 
Join Date: Mar 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Hello guys. I'm from germany. I bought a used hymee supercharger.
In the beginning i want to build it in my rx8 at self. But i'm missins same part and i'm not a modeler.
Now i become help from a germany rx8 specialist.
He have look over the parts an he is missing a blowoff valve. Is a blowoff valve usedful? How are you experience?
How have you solved the point with the oil filter. We found the solution with the long hose and to place it on the gearbox is not perfect.

Sorry for my bad english. I'm out of practice.
Heisenberg is offline  
Old 03-27-2019, 03:22 PM
  #54  
New Member
 
Join Date: Mar 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
hello guys. I'm from germany and i have bought a used hymee supercharger kit last year. I have only get a installation manual. Have someone more information over the kit. How it works. Someone write the kit has a bypass valve. I have not see it. I miss some parts for the kit and now a tuner in germany help me to bring the kit to work.

Last edited by Heisenberg; 03-27-2019 at 03:31 PM.
Heisenberg is offline  
Old 03-27-2019, 03:47 PM
  #55  
Boosted Kiwi
iTrader: (2)
 
Brettus's Avatar
 
Join Date: Apr 2006
Location: Y-cat-o NZ
Posts: 18,369
Received 245 Likes on 188 Posts
I have had a little experience with helping SKC with his kit . What did you want to know specifically ?
Brettus is online now  
Old 03-27-2019, 03:54 PM
  #56  
New Member
 
Join Date: Mar 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Has the supercharger a internal bypass / blowoff valve? Where it is? Is a blowoff valve needed?
My tuner would like to install one.
Heisenberg is offline  
Old 03-27-2019, 04:07 PM
  #57  
Boosted Kiwi
iTrader: (2)
 
Brettus's Avatar
 
Join Date: Apr 2006
Location: Y-cat-o NZ
Posts: 18,369
Received 245 Likes on 188 Posts
Yes it does ...it's integral with the plate that goes across to hold the intake pipe in place. I understand the valve was somewhat problematic however . I know skc blocked the internal access through the plate to the pressure source and fitted an aftermarket diverter valve.
Brettus is online now  
Old 03-28-2019, 02:04 AM
  #58  
New Member
 
Join Date: Mar 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Thank you Brettus. I give this information my rotary specialist.
Heisenberg is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mdl0209
Series I Trouble Shooting
14
05-23-2019 05:46 PM
theblinkof
Series I Trouble Shooting
28
01-25-2016 04:08 AM
Quiggs321
New Member Forum
19
09-30-2015 05:34 PM
FubarI33t
New Member Forum
12
09-28-2015 08:45 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Hymee Supercharger Owners


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.