help:greddy turbo kit install car stalls w/cobb ap
#105
#108
#111
i used to have Greddy RS, it sounds clean pissinggggggggg, but now HKS SSQV, man, this thing loud, it sounds like: chu chuc chu..under boost , when it is in boost, it's louder...
steven
steven
#115
no agenda
iTrader: (2)
Thread resurrection!!!
Was going to start my own ... but this one seems bang on ... with my problem.
I'm having the same problems ..... coming off the throttle over 3k rpm the car just stalls.
This isn't new behavour it's done this since I got it together.
I've not gone in to positive manifold pressure.
I've got an HKS-SSQV with the recirc setup.
I'm going out today to do a vacuum hunt.
I'll try and isolate the BOV to do this test.
RX8 2005 MT
New BHR Coils, plugs, wires
Vacuum at idle fully warmed up 18inHg (sometimes will dip quickly to 16inHg)
Draw thru maf setup, top mount T04e
Was going to start my own ... but this one seems bang on ... with my problem.
I'm having the same problems ..... coming off the throttle over 3k rpm the car just stalls.
This isn't new behavour it's done this since I got it together.
I've not gone in to positive manifold pressure.
I've got an HKS-SSQV with the recirc setup.
I'm going out today to do a vacuum hunt.
I'll try and isolate the BOV to do this test.
RX8 2005 MT
New BHR Coils, plugs, wires
Vacuum at idle fully warmed up 18inHg (sometimes will dip quickly to 16inHg)
Draw thru maf setup, top mount T04e
Thread
Thread Starter
Forum
Replies
Last Post
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
MolecularConcept
New Member Forum
15
08-05-2015 04:43 PM