![]() |
Yeah..Also what needs to be taken into consideration is the sealant on the threads the OP used..It has to compatible w/alky
|
Originally Posted by Charles R. Hill
(Post 2738387)
Sealant is included in the Snow kits and I am sure others, as well.
|
Originally Posted by 13bturbofc
(Post 2737584)
it sounds like hes talking about the 90 degree elbow that holds the injector and attaches to the hose. but i cant believe that snow would make such a shitty part. possibly its the little plastic piece or "quick release" clip on the elbow. but i cant see how that could blow out..
The guts of the 90 degree elbow ejected completely. |
Originally Posted by MazdaManiac
(Post 2737731)
OP - pics or it didn't happen!
:) |
dude....wtf? whys the outside plastic look so corroded and chewed up? that thing looks like it went through a garbage disposal...lol
|
I still say you have a poorly manufactured bad apple. There is no way boost pressure did that, it was pump pressure if anything.
|
I wouldn't put up to 250 PSI into a push-loc connector...or use plastic line either...
What ever happened to braided steel line and proper brass connectors?? |
Well the pump ships at 175psi and is adjustable up to 220psi if I remember correctly. I just left mine at 175. The hose is hard (you need to cut it with hedge trimmers practically) and is rated up to 300psi.
|
Originally Posted by 13bturbofc
(Post 2738726)
dude....wtf? whys the outside plastic look so corroded and chewed up? that thing looks like it went through a garbage disposal...lol
It looks worse now. I had to dig it out of the bottom of the tool box for the picture. |
Originally Posted by chickenwafer
(Post 2738765)
I still say you have a poorly manufactured bad apple. There is no way boost pressure did that, it was pump pressure if anything.
:uhh: |
Well as stated before and if you look at the pic I posted on the 1st pg they have since upgraded the nozzle and it is of quality build
|
Like mentioned before, Snow re-designed the nozzle. Call them & tell them whats up & they will send you their new design. When I last talked to Snow, they contacted their nozzle supplier & asked if they changed anything, when they said No, Snow dropped them & went a new route. Haven't had any problemds with their new nozzles.
|
All times are GMT -5. The time now is 07:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands